Interfaces; Groups - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Other Inactivity

19.2 Interfaces

19.2.1 Groups

A list of all configured interface routes is displayed in the Firewall->Interfaces->Groups
menu.
You can group together the interfaces of your device. This makes it easier to configure fire-
wall rules.
19.2.1.1 New
Choose the New button to set up new interface groups.
Firewall Interfaces
Fig. 150: ->
The menu Firewall->Interfaces->Groups->New consists of the following fields:
Fields in the Basic Parameters menu.
Description
The default value is
Enter the inactivity time after which a session of another type is
to be regarded as expired (in seconds).
Possible values are to
The default value is .
Groups New
-> ->
.
.
19 Firewall
391