Teldat bintec R3002 Manual page 146

Table of Contents

11 Physical Interfaces

ISDN Switch Type

Custom Time Slots

: The device sends no IE (Information Element) for channel

identification. The exchange selects the channel to be used.

: The device selects the channel to be used and signals this to

the exchange.

You can normally use the default value. It is only necessary to

change the setting in a few special cases.

If you encounter problems with outgoing calls, ask your provider

whether a special value has to be set.

Only if Port Usage =

Defines which connection partner sends the clock signal for

synchronization between the sender and the recipient. If the

clock signal is not sent by the exchange itself, one of the con-

nection partners must sent the signal.

Possible values:

: The device receives the clock signal.

: The device sends the clock signal.

Only if Port Usage =

Possible values:

terfaces can be configured for leased lines to different destin-

1984 kbps, structured

Only if Port Usage =

You have the option to bundle any channels on the physical lay-

Select the ISDN connection

: Up to 31 PPP in-

: 2048 kbps, unstruc-

and ISDN Switch Type =

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents