Teldat bintec R3002 Manual page 595

Teldat GmbH
bintec Rxxx2/RTxxx2
Recording telephone Performance feature of an answering machine. Enables a conversa-
calls tion to be recorded during the telephone call.
Remote Remote, as opposed to local.
Remote access Opposite to local access, see Remote.
Remote CAPI bintec's own interface for CAPI.
Remote diagnosis/re- Some terminals and PBXs are supported and maintained by T-
mote maintenance Service support offices over the telephone line, which often means a
service engineer does not have to visit the site.
Remote query Answering machine function. Involves listening to messages re-
motely, usually in connection with other options such as deleting
messages or changing recorded messages.
Repeater A device that transmits electrical signals from one cable connection
to another without making routing decisions or carrying out packet
filtering. See Bridge and Router.
Reset Resetting the device enables you to return your system to a pre-
defined initial state. This may be necessary if you have made incor-
rect configuration settings or the device is to be reprogrammed.
RFC Specifications, proposals, ideas and guidelines relating to the Inter-
net are published in the form of RFCs (request for comments).
Rijndael (AES) Rijndael (AES) was selected as AES due to its fast key generation,
low memory requirements and high level of security against attacks.
For more information on AES, see ht-
tp://csrc.nist.gov/encryption/aes.
RIP Routing Information Protocol
RipeMD 160 RipeMD 160 is a cryptographic hash function with 160 bits. It is re-
garded as a secure replacement for MD5 and RipeMD.
RJ45 Plug or socket for maximum eight wires. Connection for digital ter-
minals.
Roaming In a multicell WLAN, clients can move freely and log off from one ac-
cess point and log on to another when moving through cells, without
the user noticing this. This is known as roaming.
Room monitoring To use the "Room Monitoring" performance feature, the telephone
(acoustic) must be activated in the room to be monitored by means of a code,
Glossary
581