Table of Contents
Advertisement
Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Traffic shaping
Maximum Upload
Speed
Protocol Header Size
below Layer 3
Description
ets are always handled with priority.
•
face. The available bandwidth is distributed as "fairly" as pos-
sible among the (automatically detected) traffic flows in a
queue. Exception: High-priority packets are always handled
with priority.
•
(default value): QoS is deactivated on the inter-
face. The existing configuration is not deleted, but can be ac-
tivated again if required.
Activate or deactivate data rate limiting in the send direction.
The function is enabled with
The function is disabled by default.
Only for Traffic shaping = enabled.
Enter a maximum data rate for the queue in the send direction
in kbits.
Possible values are
to
The default value is , i.e. no limits are set, the queue can oc-
cupy the maximum bandwidth.
Only for Traffic shaping = enabled.
Choose the interface type to include the size of the respective
overheads of a datagram when calculating the bandwidth.
Possible values:
•
Value in byte.
Possible values are
to
•
value)
Can only be selected for Ethernet interfaces
•
•
•
: QoS is activated on the inter-
.
.
.
(default
14 Networking
221
Hide quick links:
Advertisement
Table of Contents
