Teldat bintec R3002 Manual page 448

21 Local Services
434
Local Services
Fig. 166: ->
The Local Services->DNS->DNS Servers->Newmenu consists of the following fields:
Fields in the Basic Parameters menu.
Field
Admin Status
Description
Priority
Interface Mode
DNS DNS Servers New
-> ->
Description
Select whether the DNS server should be enabled.
The function is activated by selecting
The function is enabled by default.
Enter a description for DNS server.
Assign a priority to the DNS server.
You can assign more than one pair of DNS servers ( Primary
DNS Server and Secondary DNS Server) to an interface (i. e.
for example, to an Ethernet port or a PPPoE WAN partner). The
pair with the highest priority is used if the interface is "up".
Possible values from (highest priority) to
The default value is .
Select whether the IP addresses of name servers for resolving
the names of Internet addresses are to be obtained automatic-
ally or whether up to two fixed DNS server addresses are to be
entered, depending on the priority.
Possible values:
•
Teldat GmbH
.
(lowest priority).
bintec Rxxx2/RTxxx2