Table of Contents
Advertisement
18 VPN
382
Field
Default Route
Local IP Address
Route Entries
MTU
Use key
Key Value
Description
If you enable the Default Route, all data is automatically routed
to one connection.
The function is disabled by default.
Here, enter the (LAN-side) IP address that is to be used as your
device's source address for your own packets through the GRE
tunnel.
Define other routing entries for this connection partner.
Add new entries with Add.
•
: IP address of the destination host or
network.
•
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
: The lower the value, the higher the priority of the
route (range of values ...
Enter the maximum packet size (Maximum Transfer Unit, MTU)
in bytes that is allowed for the GRE connection between the
partners.
Possible values are
to
The default value is
Enable the key input for the GRE connection, which makes it
possible to distinguish between several parallel GRE connec-
tions between two GRE partners (see RFC 1701).
The identification is enabled with
The function is disabled by default.
Only if Use key is enabled.
Enter the GRE connection key.
Possible values are
to
The default value is .
). The default value is .
.
.
.
bintec Rxxx2/RTxxx2
Teldat GmbH
Hide quick links:
Advertisement
Table of Contents
