Teldat bintec R3002 Manual page 483

Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Command Mode
Index Variables
Trigger Status
MIB Variables
Description
Only if Command Type =
Select how the MIB entry is to be manipulated.
Possible settings:
•
shall be modified.
•
Only if Command Type =
Where required, select MIB variables to uniquely identify a spe-
cific data set in MIB Table, e.g.
identification of a particular table entry is derived from the com-
bination of Index Variable (usually an index variable which is
flagged with *) and Index Value.
Use Index Variables to create more entries with Add.
Only if Command Type =
Select what status the event must have in order to modify the
MIB variable as defined.
Possible values:
• (default value): The value of the MIB variable is mod-
ified if the initiator is active.
• : The value of the MIB variable is modified if the ini-
tiator is inactive.
• : The value of the MIB variable is differentially modified if
the initiator status changes.
Only if Command Type =
Select the MIB variable whose value is to be configured as de-
pendent upon initiator status.
If the initiator is active (Trigger Status
able is described with the value entered in Active Value.
If the initiator is inactive (Trigger Status
variable is described with the value entered in Inactive Value.
21 Local Services
(default value): An existing entry
: A new entry shall be created.
. The unique
), the MIB vari-
), the MIB
469