Teldat bintec R3002 Manual page 514

Table of Contents

21 Local Services

Fields in the BRRP Advertisement Interface menu.

Ethernet Interface

Fields in the BRRP Monitored Interface menu.

Virtual Router Interface

Virtual Router IP Ad-

Virtual Router ID

Choose the interface via which BRRP advertisement packets

are sent and expected.

If you edit a Virtual Router, the Ethernet interface is displayed

and cannot be changed.

Please note: The Ethernet interface for sending the advertise-

ments is always up and running and cannot therefore be used

as the Virtual Router Interface.

Shows the IP address(es) of the interface via which BRRP ad-

vertisement packets are sent and expected.

Indicates on which physical interface the virtual interface is

based, if a new virtual interface is created. The name of the vir-

tual interface is assigned automatically when it is created.

Shows the name of the virtual interface, if a virtual interface that

has already been created is edited.

Enter the IP address and the netmask of the virtual router. Here

enter the IP address that you want to use in the local network as

the actual gateway IP address.

To avoid problems in the LAN, the IP Address for advert-

isements and the Virtual Router IP Address cannot origin-

ate from the same subnet.

Select the ID of the virtual router.

This ID identifies the "virtual router" in the LAN and is part of

every BRRP advertisement packet that is sent by the current

Possible values are whole numbers between

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents