Monitoring; Active Clients - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2
Field
VLAN
VLAN ID

13.4 Monitoring

This menu is used to monitor your WLAN infrastructure.

13.4.1 Active Clients

Wireless LAN Controller
Fig. 69:
In the Wireless LAN Controller->Monitoring->Active Clients menu, current values of all
active clients are displayed.
For each client you will see an entry with the following parameter set: Location, Name,
VSS, Client MAC, Client IP Address, Signal : Noise (dBm) , Status, Uptime.
Possible values for Status
Status
None
Logon
Associated
Authenticate
Description
Select whether the VLAN segmentation is to be used for this
wireless network.
The function is activated by selecting
The function is disabled by default.
Enter the number that identifies the VLAN.
Possible values are to
VLAN ID 1 is not possible as it is already in use.
Monitoring Active Clients
-> ->
Meaning
The client is no longer in a valid status.
The client is currently logging on with the WLAN.
The client is logged on with the WLAN.
The client is in the process of being authenticated.
13 Wireless LAN Controller
.
.
181