Rogue Clients - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2

13.4.6 Rogue Clients

Wireless LAN Controller
Fig. 74:
The Wireless LAN Controller->Monitoring+Rogue Clients menu displays the clients
which have attempted to gain unauthorised access to the network and which are therefore
on the blacklist. The blacklist is configured for each VSS in the Wireless LAN
Controller->Slave AP configuration->Wireless Networks (VSS) menu. You can also
add a new entry to the static blacklist.
Possible values for Rogue Clients
Status
Rogue Client MAC Ad-
dress
SSID
Attacked Access Point Displays the AP concerned.
Signal dBm
Type of attack
First seen
Last seen
Static Blacklist
Delete
13.4.6.1 New
Choose the Newbutton to configure additional blacklist entries.
Monitoring Rogue Clients
-> +
Meaning
Displays the MAC address of the client on the blacklist.
Displays the SSID involved.
Displays the signal strength of the client during the attempted
access.
This displays the type of potential attack, e. g. an incorrect au-
thentication.
Displays the time of the first registered attempted access.
Displays the time of the last registered attempted access.
You can categorise a rogue client as untrustworthy by selecting
the checkbox in the Static Blacklist column. The block on the
client does not then end automatically, rather you need to lift it
manually.
You can delete entries with the
13 Wireless LAN Controller
symbol.
185