Teldat bintec R3002 Manual page 206

Table of Contents

14 Networking

Fields in the menu Route Parameters

Local IP Address

Destination IP Ad-

dress/Netmask

Gateway IP Address

Select the type of Route Class.

Possible values:

: Defines a route with the default parameters.

: Select whether the route is to be defined with ex-

tended parameters. If the function is active, a route is created

with extended routing parameters such as source interface

and source IP address, as well as protocol, source and des-

tination port, type of service (TOS) and the status of the

device interface.

Only for Route Type =

Enter the IP address of the host to which your device is to for-

ward the IP packets.

Only for Route Type

Enter the IP address of the destination host or destination net-

When Route Type =

Also enter the relevant netmask in the second field.

Only for Route Type =

Enter the IP address of the gateway to which your device is to

forward the IP packets.

Select the priority of the route.

The lower the value, the higher the priority of the route.

Value range from

. The default value is .

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents