Chapter 2 About This Guide - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2

Chapter 2 About this guide

This document is valid for Teldat devices with system software as of software version 9.1.2.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter
Introduction
About this guide
Installation
Basic configuration
Reset
Technical data
Variable switching of S0
interfaces
Access and configura-
tion
Assistants
System Management
Physical Interfaces
LAN
Wireless LAN Control-
ler
Networking
Routing Protocols
Multicast
Description
You see an overview of the device:
We explain the various components of this manual and how to
use it.
This contains instructions for how to set up and connect your
device.
This chapter provides a step-by-step guide to the basic func-
tions on your device.
This chapter explains how to reset your device to the ex works
state.
This section contains a description of all the device's technical
properties.
This section describes how to switch the S0 interfaces from ex-
ternal to internal.
This includes explanations about the different access and con-
figuration methods.
All the configuration options of the GUI are described in this
chapter. The individual menus are described in the order of nav-
igation.
The individual chapters also contain more detailed explanations
on the subsystem in question.
2 About this guide
3