Teldat bintec R3002 Manual page 390

Table of Contents

LCP Alive Check

Fields in the IP Options menu.

Possible values:

: MPP encryption is not used.

(default value): MPP encryption V2 with 128 bit is

used to RFC 3078.

used as compatible with Microsoft and Cisco.

If necessary, select the type of encryption that should be used

for data traffic to the connection partner. If encryption is set, the

remote terminal must also support it, otherwise a connection

cannot be set up.

Possible values:

(default value): Encryption is not used.

: Microsoft Point-to-Point Compression

Select whether the availability of the remote terminal is to be

checked by sending LCP echo requests or replies. This is re-

commended for leased lines, PPTP and L2TP connections.

The function is enabled with

The function is enabled by default.

Select whether and how routes are propagated via the interface

and/or OSPF protocol packets are to be sent.

Possible values:

(default value): OSPF is not activated for this inter-

face, i.e. no routes are propagated or OSPF protocol packets

sent over this interface. Networks reachable over this inter-

face are, however, included when calculating the routing in-

formation and propagated over active interfaces.

: OSPF is activated for this interface, i.e. routes are

: MPP encryption V2 with 128 bit is

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents