Table of Contents
Advertisement
Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Area ID
Import external routes
Import summary
routes
Create area default
route (only ABR)
Fields in the Route Aggregation menu.
Field
IP Address
Description
Enter the ID to identify the OSPF aea. The backbone area is
.
Specifies whether the gateway routing information generated
from external autonomous systems (not areas) is to be impor-
ted.
The function is enabled with
The function is activated by default.
Only for Import external routes =
Define whether summary LSAs (routing information generated
by Area Border Gateway) are to be sent to the stub area.
Possible values:
•
(default value): Activates import.
•
: Deactivates the import.
Only for Import external routes =
Select whether the Area Border Gateway shall send no LSA's in
the stub area, but rather only propagate a default route.
The function is enabled with
The function is not activated by default.
Description
Define the OSPF area.
•
: Here you enter the IP address of the area to be
combined.
•
: Enter the netmask here.
•
: Subnetworks that are combined into areas either
initiate propagation of the given combination (
value), or cause the subnetwork not to be propagated outside
the area at all (
), i.e. neither the actual subnetworks nor
the combined overall subnetwork are propagated.
Add new entries with Add.
15 Routing Protocols
.
.
, default
249
Hide quick links:
Advertisement
Table of Contents
