Table of Contents
Advertisement
Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Default Route
Create NAT Policy
IP Assignment Pool
(IPCP)
Local IP Address
Route Entries
Description
Possible values:
•
(default value): You enter a static IP address.
•
Your device dynamically assigns an IP address to the remote
terminal.
•
: Only for Connection Type =
device is dynamically assigned an IP address.
Only for IP Address Mode =
and
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
The function is disabled by default.
Only for IP Address Mode =
and
Specify whether Network Address Translation (NAT) is to be ac-
tivated for this connection.
The function is enabled with
The function is disabled by default.
Only for IP Address Mode =
Select an IP pool configured in the WAN->Internet +
Dialup->IP Poolsmenu.
Only for IP Address Mode =
Enter the WAN IP address of your device.
Only for IP Address Mode =
Enter Remote IP Address and Netmask of the LANs for L2TP
partners and the corresponding Metric. Add new entries with
Add.
: Only for Connection Type =
.
.
18 VPN
.
. Your
367
Hide quick links:
Advertisement
Table of Contents
