Dodge 2006 LX Magnum Owner's Manual
  1. Manuals
  2. Brands
  3. Dodge Manuals
  4. Automobile
  5. 2006 LX Magnum
  6. Owner's manual
Dodge 2006 LX Magnum Owner's Manual

Dodge 2006 LX Magnum Owner's Manual

Dodge 2006 magnum automobile owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 LX Magnum and is the answer not in the manual?

Questions and answers

Related Manuals for Dodge 2006 LX Magnum

Summary of Contents for Dodge 2006 LX Magnum

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...

  • Page 3: Table Of Contents

    CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .

  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
  • Page 5 INTRODUCTION 5...

  • Page 6: Warnings And Cautions

    The vehicle identification number (VIN) is located near the left front corner of the windshield. The VIN is visible from outside of the vehicle through the windshield. This number also appears on the Automobile Information VIN LOCATION Disclosure Label affixed to a window on your vehicle.

  • Page 7: Vehicle Modifications / Alterations

    INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.

  • Page 9: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....11 Ignition Key Removal ....11 Key-In-Ignition Reminder .
  • Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Windows ..... . .27 Occupant Restraints .....30 Lap/Shoulder Belts .

  • Page 11: Things To Know Before Starting Your Vehicle 9

    A WORD ABOUT YOUR KEYS You can insert the double sided keys into the locks with either side up. Vehicle Key The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer.

  • Page 12: Key-In-Ignition Reminder

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE — if equipped. Refer to Personal Settings in the electronic vehicle information center (EVIC) Section of this manual for details. WARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured.

  • Page 13: Replacement Keys

    The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regardless of whether or not the vehicle is locked or unlocked. During normal operation, the Vehicle Theft Alarm Indi- cator Light will come on for three (3) seconds immedi- ately after the ignition switch is turned on for a bulb check.

  • Page 14: Customer Key Programming

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE At the time of purchase, the original owner is provided with a four digit PIN number. This number is required for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming procedure.

  • Page 15: General Information

    General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undes- ired operation.

  • Page 16: Power Door Locks

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
  • Page 17 Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4.
  • Page 18 18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Depress the power door lock switch to lock the doors. Power Door Lock Switch 4. A single chime will indicate the completion of the programming. Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1.

  • Page 19: Child Protection Door Lock

    For vehicles not equipped with the EVIC, the Auto Unlock feature can be enabled or disabled by performing the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending up in the LOCK position.

  • Page 20: Remote Keyless Entry

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To activate the system, open the rear door and move the child lock control, located near the door’s rear latch, to the ON position. Child Lock Control When the child lock system is engaged the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.

  • Page 21: To Unlock The Doors

    Keyless Entry Transmitter To unlock the doors: Press and release the UNLOCK button on the transmitter once to unlock the driver’s door, or twice to unlock all doors. The turn signal lights will flash twice to acknowl- edge the unlock signal. The illuminated entry system also turns on.

  • Page 22: To Lock The Doors

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm.

  • Page 23: General Information

    center (EVIC) equipped vehicles, refer to Personal Set- tings in the Electronic Vehicle Information Center (EVIC) section of this manual. On non-EVIC equipped vehicles, perform the following steps: 1. Press and hold the UNLOCK button on the key fob. 2. Continue to hold the UNLOCK button at least 4 seconds, but not longer than 10 seconds, then press and hold the LOCK button while still holding the UNLOCK button.

  • Page 24: Transmitter Battery Service

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Service The recommended replacement battery is one CR2032 battery. NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit board. 1. With the transmitter buttons facing down, remove the small screw, and separate the two halves of the transmit- ter.
  • Page 25 To arm the system: Remove the key from the ignition switch and either: 1. Press a power door lock switch while the driver’s or passenger’s door is open. 2. Press the LOCK button on the keyless entry transmit- ter. After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds.

  • Page 26: Liftgate

    26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the system. The alarm system will be activated when the battery is connected if the system was previously armed.

  • Page 27: Windows

    WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed.
  • Page 28 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The window lock switch on the driver’s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed the window controls on the passenger doors will not illuminate and the passen- ger windows will be disabled.
  • Page 29 To close the window part way, lift the window switch to the first detent and release when you want the window to stop. The power window switches remain active for 10 min- utes after the ignition switch has been turned off. The time is customer programmable through the electronic vehicle information center (EVIC) —...

  • Page 30: Occupant Restraints

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the rear windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting.

  • Page 31: Lap/Shoulder Belts

    Lap/Shoulder Belts All seating positions in your vehicle are equipped with Lap/Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
  • Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
  • Page 33 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
  • Page 34 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.

  • Page 35: Pretensioners

    Adjusting Upper Shoulder Belt As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.

  • Page 36: Automatic Locking Mode - If Equipped

    36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, the Enhanced Warning System (BeltAlert) will continue to chime and flash the Seat Belt Warning Light for 96 seconds or until the driver’s or front passenger’s seat belt is buckled.

  • Page 37: Seat Belts And Pregnant Women

    seating position. Children 12 years old and under should be properly restrained in the rear seat whenever possible. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted.

  • Page 38: Driver And Right Front Passenger Supplemental Restraint System (Srs) - Airbag

    38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag Front Airbag Components This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems.
  • Page 39 WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. You may damage the airbags and you could be injured be- cause the airbags are no longer functional. These protective covers for the airbag cushions are de- signed to open only when the airbags are inflating.
  • Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children that are not big enough to wear the vehicle seat belt properly (refer to information on Child Restraint in this section) should be secured in the rear seat in child restraints or belt-positioning booster seats. Older children who do not use child restraints or belt- positioning booster seats should ride properly buckled up in the rear seat.
  • Page 41 Airbag System Components The front airbag system consists of the following: • Airbag Control Module • AIRBAG Readiness Light • PASS AIRBAG OFF Readiness Light • Front Impact Accelerometer sensors • Side Impact Accelerometer sensors • Driver Airbag • Passenger Airbag •...
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE and column. If the key is in the “LOCK” position, in the ACC position, or not in the ignition, the airbags are not on and will not inflate. • The airbag control module also turns on the AIRBAG light, and the Passenger Airbag Disable (PAD) Indicator Light in the instru- ment panel for 6 to 8 seconds when the...
  • Page 43 NOTE: A collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system. If you do have a collision which deploys the airbags, any or all of the following may occur: •...
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The interior lights can only be deactivated if the key is removed from the ignition switch or the vehicle is driven. Side Airbag System The airbag control module determines if a side collision is severe enough to require the airbag to inflate.
  • Page 45 Occupant Classification System • The Occupant Classification System (OCS) is part of a Federally regulated safety system required for this vehicle. It is designed to turn off the front passenger airbag in the unlikely event that a rear-facing infant seat is in the front passenger seat. NOTE: Children 12 years and under should always ride buckled up in a rear seat in an appropriate child restraint.
  • Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Passenger Airbag Front Passenger Disable (PAD) Seat Occupant Indicator Light Adult Grocery Bags, Heavy Briefcases and Other Relatively Light Objects Empty or Very OFF* Small Objects * Since the system senses weight, some small objects will turn the PAD Indicator Light on.
  • Page 47 the PAD Indicator Light and the Airbag Warning Light are illuminated to show that the passenger airbag is turned off until the fault is cleared. If an object is lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the PAD Indicator Light and the Airbag Warning Light.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE determine whether the front passenger airbag should be turned off. It also determines the rate of airbag inflation during a collision. • The Passenger Airbag Disabled (PAD) Indicator Light indicates to the driver and passenger when the airbag is turned OFF.
  • Page 49 • Do not use prior or future model year seat covers not designated for the specific model being repaired. Al- ways use the correct seat cover specified for the vehicle. • Do not replace the seat cover with an aftermarket seat cover.
  • Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE associated with universities, and with hospital and insur- ance organizations. In the event that an investigation is undertaken by DaimlerChrysler (regardless of initiative), the company or its designated representative will first obtain permis- sion of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stored, unless ordered to download data...
  • Page 51 • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Cruise control status • Traction/stability control status Child Restraint Everyone in your vehicle needs to be buckled up all the time, babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems.
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE one year old and weigh at least 9 kg (20 lbs). Two types of child restraints can be used rearward-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearward-facing in the vehicle.
  • Page 53 • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instructions that come with the restraint. If you install the restraint improperly, it may not work when you need it.
  • Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back.
  • Page 55 LATCH Anchorages Installing the LATCH-Compatible Child Restraint System We urge that you carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
  • Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE cover directly behind the seat where you are placing the child restraint and attach the tether strap to the anchor- age, being careful to route the tether strap to provide the most direct path between the anchor and the child restraint.
  • Page 57 The center rear seating position has an automatic locking retractor and has a distinctive label on the seat belt webbing. The seat belt must be in the automatic locking mode in order to enable a child restraint to be tightly installed.

  • Page 58: Engine Break-In Recommendations

    58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE between the two posts. If not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. 2. Attach the tether strap hook of the child restraint to the tether anchor and remove slack in the tether strap according to the child restraint manufacturer’s instruc- tions.

  • Page 59: Safety Tips

    A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty. SAFETY TIPS Exhaust Gas WARNING! Exhaust gases can injure or kill.

  • Page 60: Periodic Safety Checks You Should Make Outside The Vehicle

    60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE turned ON. If the LED is not lit during starting, have it checked. If the light stays on or comes on while driving, have the system checked by an authorized dealer. Defroster Check operation by selecting the defrost mode and place the blower control on high speed.

  • Page 61: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......65 Inside Day/Night Mirror ....65 Automatic Dimming Inside Mirror —...
  • Page 62 62 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support ..... . .90 Heated Seats — If Equipped ....90 Head Restraints .
  • Page 63 Traction Control System (TCS) — If Equipped ......105 Brake Assist System (BAS) — If Equipped ..106 Electronic Stability Program (ESP) —...
  • Page 64 64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition Off Operation ....120 Sunroof Fully Closed ....121 Electrical Power Outlets .

  • Page 65: Mirrors

    MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical adjustment of the mirror. Adjusting Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).

  • Page 66: Understanding The Features Of Your Vehicle

    66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Driver’s Side Outside Mirror Auto Dimmer — If Equipped The driver’s side outside mirror automatically adjusts for annoying headlight glare from vehicles behind you.

  • Page 67: Power Remote-Control Mirrors

    Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror, right mirror, or off position. After selecting a mirror move the knob in the same direction you want the mirror to move.

  • Page 68: Hands-Free Communication (Uconnect™) - If Equipped

    68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., Call” “Mike” ”Work or Dial” “248-555-1212 ).

  • Page 69: Operations

    UConnect™ Switches The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www.chrysler.com/uconnect for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon- nect™...
  • Page 70 To complete the pairing process, you will need to refer- ence your cellular phone owner’s manual. One of the following vehicle specific websites may also provide detailed instructions for pairing with the brand of phone that you have: NOTE: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect...
  • Page 71 The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Setup Phone Pairing. • When prompted, after the voice on beep, say Pair a Phone.
  • Page 72 72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dial by Saying a Number • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Dial. • System will prompt you to say the number you want call.
  • Page 73 Add Names to Your UConnect™ Phonebook NOTE: Adding names to phonebook is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Phonebook New Entry. • When prompted, say the name of the new entry. Use of long names helps the voice recognition and is recom- mended.
  • Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After you are finished editing an entry in the phonebook, you will be given the opportunities to edit another entry in the phonebook, call the number you just edited, or return to the main menu. Phonebook Edit can be used to add another phone number to a name entry that already exists in the phonebook.

  • Page 75: Phone Call Features

    • After confirmation, the phonebook entries will be deleted. List All Names in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Phonebook List Names. • The UConnect™ system will play the names of all the phonebook entries.
  • Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE on hold and answer the incoming call. NOTE: The UConnect™ system compatible phones in market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only either answer an incoming call or ignore it.

  • Page 77: Uconnect™ System Features

    Call Termination To end a call in progress, momentarily press the Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. •...
  • Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect™ language change op- eration, only the language specific 32 name phonebook is usable. The paired phone name is not language specific and usable across all languages.
  • Page 79 NOTE: The Towing Assistance number dialed is based on the Country where the vehicle is purchased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico). Please refer to the 24-Hour “Towing Assistance” cover- age details in the Warranty information booklet and on the 24–Hour Towing Assistance Card.
  • Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In - Overriding Prompts The ’Voice Recognition’ button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately. For example, if a prompt is playing Would you like to pair a phone, clear a , you could press the ’Voice Recognition’...

  • Page 81: Advanced Phone Connectivity

    Mute/Un-mute (Mute off) When you mute the UConnect™ system, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the UConnect™ system: •...
  • Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE List Paired Cellular Phone Names • Press the ’Phone’ button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone pairing”. • When prompted, say List Phones. • The UConnect™ system will play the phone names of all paired cellular phones in order from the highest to the lowest priority.

  • Page 83: Things You Should Know About Your Uconnect™ System

    • When prompted say the priority number of the cellu- lar phone you wish to delete. You can also press the Voice Recognition’ button anytime while the list is being played and say the priority number of the phone you wish to delete. Things You Should Know About Your UConnect™...
  • Page 84 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, •...
  • Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85...
  • Page 86 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 87 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87...

  • Page 88: Seats

    88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English Primary Alternate(s) Zero Add location Add new All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing...

  • Page 89: Power Reclining Seats

    WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls.

  • Page 90: Lumbar Support

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever for- ward to increase and rearward to decrease the desired amount of lumbar support. Lumbar Support Control Lever Heated Seats —...
  • Page 91 Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperature level.

  • Page 92: Head Restraints

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjustable restraints should be adjusted so that the upper edge is as high as practical.

  • Page 93: Adjustable Pedals - If Equipped

    WARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in an accident. Children should be seated and using the proper restraint system.

  • Page 94: To Open And Close The Hood

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch rearward to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON.

  • Page 95: Lights

    Hood Safety Catch Use the hood prop rod (if equipped) to secure the hood in the open position. To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 inches (15 cm) and then drop it. This should secure both latches.

  • Page 96: Interior Lights

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overhead Console Interior Lights The interior lights come on when a door is opened. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.

  • Page 97: Headlight Switch

    odometer, Electronic Vehicle Information Center — if equipped, and radio when the parking lights or head- lights are on. Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch controls the operation of the headlights, parking lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights.

  • Page 98: Headlights, Parking Lights, Instrument Panel Lights

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights, Parking Lights, Instrument Panel Lights Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Turn to the second detent for headlight, park light and instrument panel light operation.

  • Page 99: Headlights On With Wipers (Available With Auto Headlights Only)

    Headlight Switch Headlights On With Wipers (Available with Auto Headlights Only) The headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUTO position. The headlights will also turn off when the wipers are turned off if they were turned on by this feature.

  • Page 100: Fog Lights - If Equipped

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the headlights are turned off before the ignition, they will turn off in the normal manner. NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this feature The Headlight delay time is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC).

  • Page 101: Windshield Wipers And Washers

    WINDSHIELD WIPERS AND WASHERS Windshield Wiper Operation — Front The front wipers and washers are operated by the multi-function lever. The lever is located on the left side of the steering column. Rotate the end of the control lever to select the desired wiper speed. Windshield Wiper/Washer Control Intermittent Wiper System Use the intermittent wiper when weather conditions...

  • Page 102: Windshield Wiper Operation - Rear

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE (EVIC) — If equipped. Refer to ”Headlights On With Wipers” in the Electronic Vehicle Information Center section of this manual for details. Windshield Wiper Operation — Rear The rear wiper and washer is operated by the rear wiper switch.

  • Page 103: Adding Washer Fluid

    Rear Windshield Washer To use the rear washer, push the right side of the windshield wiper/washer switch in and hold while spray is desired (maximum spray of 10 seconds). The wiper operates for 2 wipe cycles after the switch is released.

  • Page 104: Tilt/Telescoping Steering Column

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN Unlock the steering column by pulling out the handle located directly below the column. To tilt the column move the steering wheel up or down as desired. To lengthen or shorten the steering column pull out or push in the steering wheel.

  • Page 105: Traction Control System (Tcs) - If Equipped

    TRACTION CONTROL SYSTEM (TCS) — IF EQUIPPED WARNING! TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The TCS cannot prevent accidents, includ- ing those resulting from excessive speed in turns, or hydroplaning.

  • Page 106: Brake Assist System (Bas) - If Equipped

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Traction Control Switch To turn the system back ON, press the traction control switch a second time until the traction control Indicator turns OFF. NOTE: • The traction control system comes on each time the ignition switch is turned ON.

  • Page 107: Electronic Stability Program (Esp) - If Equipped

    WARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning.
  • Page 108 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ESP enhances directional control and reduces driving wheel spin of the vehicle under various driving condi- tions. The system operates when the vehicle speed is greater than 7.8 mph (12.6 km/h). The ESP system corrects for over/understeering of the vehicle by applying brakes to the appropriate wheel.

  • Page 109: Synchronizing Esp

    wheel slip control is active at vehicle speeds between approximately 24 mph (40 km/h) and 50 mph (80 km/h). CAUTION! If the vehicle is towed with the front axle raised, the engine must be shut off (key in the ignition switch to the OFF/LOCK or ACC position).

  • Page 110: To Activate

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate: Push and release the speed control lever (“ON/ OFF”) once and an indicator light will illumi- nate in the instrument cluster when the elec- tronic speed control is active. To turn the system OFF, Push and release the lever (“ON/OFF”) again and the system and indicator will turn off.

  • Page 111: To Accelerate For Passing

    so that pushing the lever up and releasing three times will increase speed by 3 mph (4.8 km/h), etc. To decrease speed while speed control is set, push the lever down and hold (“COAST”). Release the lever when the desired speed is reached, and the new speed will be set.

  • Page 112: Overhead Console - If Equipped

    112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/reading lights, an optional universal garage door opener (HomeLink ), storage for sunglasses, and optional power sunroof switches. Overhead Console Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights.

  • Page 113: Garage Door Opener - If Equipped

    GARAGE DOOR OPENER — IF EQUIPPED The HomeLink Universal Transceiver replaces up to three remote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button. The Universal Transceiver operates off your vehicle’s battery and charging system;...

  • Page 114: Programming Homelink

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
  • Page 115 HomeLink Buttons 2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed.

  • Page 116: Canadian Programming/Gate Programming

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE door opener may have a multiple security code system (rolling code system). Please proceed to steps 6–8 to complete the programming of a rolling code equipped device (most common garage door openers require this step).

  • Page 117: Using Homelink

    3. Continue to press and hold the HomeLink button while you press and release every two seconds ( cycle ) your hand-held transmitter until the frequency signal has successfully been accepted by HomeLink. The EVIC display will show “Channel X Trained” (where X is Channel 1, 2, or 3).

  • Page 118: Security

    118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Security If you sell your vehicle, be sure to erase the frequencies by following the “Erasing HomeLink Buttons” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada.

  • Page 119: Opening Sunroof - Express

    WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. •...

  • Page 120: Pinch Protect Override

    120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.

  • Page 121: Sunroof Fully Closed

    For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 60 minutes after the ignition switch is turned off. Opening either front door will cancel this feature. The time is programmable through the EVIC. Refer to “Delay Power Off to Accessories Until Exit”...
  • Page 122 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Front Power Outlet Center Console Power Outlet...

  • Page 123: Electrical Outlet Use With Engine Off

    The auxiliary outlet is also powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Auxiliary Power Outlet UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Electrical Outlet Use With Engine Off CAUTION! •...

  • Page 124: Cup Holders

    124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS Front Seat Cup Holders The cup holders are located in the forward edge of the center console. Front Seat Cup Holders Rear Seat Cup Holders The rear seat cup holders are located in the center armrest between the rear seats.

  • Page 125: Storage

    STORAGE Console Features The center console contains a large storage bin. The storage bin contains a four-slot coin holder (designed to hold various size coins) and a rubber mat at the bottom of the bin for noise control. The bin is large enough to hold a portable AC/DC converter to power laptops, games, or other electrical equipment.
  • Page 126 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly flat extension of the removable tri-fold load floor.
  • Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Load Floor Partially Folded Load Floor Fully Folded Rollaway Tonneau Cover — If Equipped The tonneau cover consists of a standard, removable rollaway tonneau cover that is mounted in the rear cargo area behind the seats. Notches in the trim panels close to the liftgate secure the extended cover in place to keep items out of sight.
  • Page 128 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the tonneau cover first insert either of the spring-loaded outer posts followed by the opposite end into the front attachment points shown. Front Attachment Points Next pull the tonneau cover using the handle and insert the rear posts by following the guides along each side of the rear compartment making sure the cover is fully seated.
  • Page 129 Waterproof Liner The optional waterproof liner can be placed over the lower load floor. Waterproof Liner UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Cargo Organizer The optional cargo organizer can also be placed into the lower load floor. Lift the handle and pull to open the cargo organizer.
  • Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Tie-Down Hooks The tie-downs located on cargo area floor and on the rear trim panels should be used to safely secure loads when vehicle is moving. WARNING! • Cargo tie-down hooks are not safe anchors for a child seat tether strap.

  • Page 131: Roof Luggage Rack - If Equipped

    • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision. WARNING! To help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts.
  • Page 132 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the Tire and Loading information placard for more information about cargo and load capacity. The placard is located either on the driver’s side “B” pillar or the driver door. Flip the lever up to attach or adjust the crossbars. Then turn lever counter-clockwise to loosen lower clamp.

  • Page 133: Load Leveling System - If Equipped

    WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.

  • Page 135: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instruments And Controls ....138 Standard Instrument Cluster ....139 Premium Instrument Cluster .
  • Page 136 136 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - CD Mode ..163 Operation Instructions - Auxiliary Mode ..165 Operating Instructions - Hands Free Phone — If Equipped ......166 Operating Instructions - Satellite Radio —...
  • Page 137 Selecting Satellite Mode In REF, RAQ, And RAK Radios ......179 Selecting a Channel ....179 Storing And Selecting Pre-Set Channels .

  • Page 138: Instruments And Controls

    138 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENTS AND CONTROLS...

  • Page 139: Standard Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 139 STANDARD INSTRUMENT CLUSTER...

  • Page 140: Premium Instrument Cluster

    140 UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...

  • Page 141: Instrument Cluster Descriptions

    INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Trip Odometer Button Standard Cluster The word TRIP will appear when this button is pressed. Push in and hold the button for two seconds when the trip odometer is displayed to reset it to 0 miles or kilometers.
  • Page 142 142 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
  • Page 143 9. Engine Temperature Warning Light This light illuminates, and will be accompanied by a single chime to warn of an overheated engine condition. The engine temperature is critically hot, and the vehicle should be turned off immediately. The vehicle should be serviced as soon as possible.
  • Page 144 144 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Transmission Range Indicator This display indicator shows the automatic transmission gear selection. 15. Front Fog Light Indicator — If Equipped This light shows the front fog lights are ON. (See page 100 for more information.) 16.
  • Page 145 19. Electronic Vehicle Information Center Display — If Equipped When the appropriate conditions exist, this display shows the Electronic Vehicle Information Center (EVIC) messages. (See page 148 for more information.) (only on vehicles equipped with steering wheel mounted switches). NOTE: On non-EVIC equipped vehicles the odometer is located here.
  • Page 146 146 UNDERSTANDING YOUR INSTRUMENT PANEL The operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected.
  • Page 147 23. Anti-Lock Brake Light — If Equipped This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required.

  • Page 148: Electronic Vehicle Information Center (Evic) - If Equipped

    148 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) – If Equipped Electronic Vehicle Information Center The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display. It is located in the instrument cluster below the speedometer. Vehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC.

  • Page 149: Electronic Vehicle Information Center (Evic) Displays

    Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being FUNC- played (if so equipped), or changes the current TION CD track being played (if so equipped) when SELECT Button the EVIC is in the Compass/Temp/Audio...

  • Page 150: Trip Functions

    150 UNDERSTANDING YOUR INSTRUMENT PANEL • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph) • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (with a single chime) •...
  • Page 151 • Distance To Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level.

  • Page 152: Compass Display

    152 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Display The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight com- pass readings and the outside temperature. COM- PASS Button Automatic Compass Calibration This compass is self calibrating, which eliminates the need to manually set the compass.

  • Page 153: Telephone - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 153 To set the variance: Turn the ignition switch ON. Then, press and hold the compass button for approximately 2 seconds. Then, press the SCROLL button until “Compass Variance” displays in the EVIC. Both the “Compass Variance”...
  • Page 154 154 UNDERSTANDING YOUR INSTRUMENT PANEL • Caller ID phone number display. When the appropriate conditions exist, and if supported by the cell phone, the EVIC will display the following telephone symbols: The EVIC displays this symbol to indicate the signal strength of the UConnect™ phone. The number of horizontal bars increase as the strength of the UConnect™...

  • Page 155: Navigation - If Equipped

    The EVIC displays this symbol to indicate that a phone connection has been made. Call in Progress The EVIC displays this symbol to indicate that the UConnect™ phone is currently not avail- able. Phone Avail- able Navigation — If Equipped Navigation Display Control Press and release the MENU button until Navigation displays in the EVIC.
  • Page 156 156 UNDERSTANDING YOUR INSTRUMENT PANEL “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francais.
  • Page 157 “Flash Lights with Remote Key Lock” When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter. This feature may be selected with or without the sound horn on lock feature selected.

  • Page 158: Radio General Information

    158 UNDERSTANDING YOUR INSTRUMENT PANEL “Display Units of Measure in” The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make your selection, press and release the FUNCTION SELECT button until “US” or “METRIC”...

  • Page 159: Electrical Disturbances

    Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the frequency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs.

  • Page 160: Sales Code Ref - Am/Fm/Cd (Single Disc) Radio With Optional Satellite Radio And Hands Free Phone Capability

    160 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SATELLITE RADIO AND HANDS FREE PHONE CAPABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. REF Radio Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
  • Page 161 SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
  • Page 162 162 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Adjust the minutes using the right side Tune/Audio control. 5. To exit, press any button/knob or wait 5 seconds. RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tuner to search for the next frequency in the direction of the arrows.

  • Page 163: Operation Instructions - Cd Mode

    selected within 5 seconds after pressing the SET button, the station will continue to play but will not be stored into push-button memory. You may add a second station to each push-button by repeating the above procedure with this exception: Press the SET button twice and SET 2 will show in the display window.
  • Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button (CD Mode) Press the right side of the SEEK button for the next track on the CD. Press the left side of the button to return to the beginning of the current track, or return to the beginning of the previous track if the CD is within the first 10 seconds of the current selection.

  • Page 165: Operation Instructions - Auxiliary Mode

    Press the RND button a second time to stop Random Play. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player, cassette player or microphone and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.

  • Page 166: Operating Instructions - Hands Free Phone - If Equipped

    166 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (Auxiliary Mode) No function. RND/SET Button (Auxiliary Mode) No function. Mode Button (Auxiliary Mode) Press the mode button repeatedly to select between the CD player or Satellite Radio (if equipped). Operating Instructions - Hands Free Phone — If Equipped Refer to the HANDS FREE PHONE (UConnect™) section of the Owner’s Manual.

  • Page 167: Operating Instructions - Radio Mode

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
  • Page 168 168 UNDERSTANDING YOUR INSTRUMENT PANEL 3. After the hours are adjusted, press the right side Tune/Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side Tune/Audio control. 5. To exit, press any button/knob or wait 5 seconds. INFO Button (Radio Mode) Press the INFO button for an RBDS station (one with call letters displayed).
  • Page 169 RND/PTY Button (Radio Mode) Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn off. Turning the tune knob within 5 seconds will allow the program format type to be selected.

  • Page 170: Operating Instructions - Tape Player

    170 UNDERSTANDING YOUR INSTRUMENT PANEL If a preset button is activated while in the PTY (Program Type) mode, the PTY mode will be exited and the radio will tune to the preset station. NOTE: If you have selected a PTY with the tune knob, simply pressing the tune button in will go directly to a “PTY seek”.

  • Page 171: Tape Eject

    Tape Eject Press this button and the cassette will disen- gage and eject from the radio. Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the feature. Changing Tape Direction If you wish to change the direction of tape travel (side being played), press Preset 6.

  • Page 172: Load/Eject Button (Cd Mode For Cd Audio Play)

    172 UNDERSTANDING YOUR INSTRUMENT PANEL Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
  • Page 173 Radio display will show EJECTING DISC when the disc is being ejected and prompt the user to remove the disc. Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded.

  • Page 174: Notes On Playing Mp3 Files

    174 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the FF button to fast forward through the tracks. Release the FF button to stop the fast forward feature. If the RW button is pressed, the current track will reverse to the beginning of the track and begin playing. Press the RND button a second time to stop Random Play.
  • Page 175 Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.

  • Page 176: Operation Instructions - (Cd Mode For Mp3 And Wma Audio Play)

    176 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays the next...
  • Page 177 INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls through the following TAG information: Song Title, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once more to return to elapsed time priority mode.

  • Page 178: Satellite Radio - If Equipped

    178 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Video Entertainment System (VES) (If Equipped) Refer to separate “Video Entertainment System (VES) Guide.” SATELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast.

  • Page 179: Selecting Satellite Mode In Ref, Raq, And Rak Radios

    ESN/SID Access With RAQ and RAK Radios With the ignition switch in the ACCESSORY position and the radio OFF, press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will be displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or 5 minutes has passed since any button was pushed.

  • Page 180: Storing And Selecting Pre-Set Channels

    180 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Channels that may contain objectionable con- tent can be blocked. Contact Sirius Customer Care at 888-539-7474 to discuss options for channel blocking or unblocking. Please have your ESN/SID information available. Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stations to push button memory.

  • Page 181: Video Entertainment System (Sales Code Xrv) - If Equipped

    • Dense tree coverage may interrupt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. VIDEO ENTERTAINMENT SYSTEM (SALES CODE XRV) —...

  • Page 182: Navigation System (Sales Code Rec) - If Equipped

    182 UNDERSTANDING YOUR INSTRUMENT PANEL Raising The DVD Screen Remote Control Location NAVIGATION SYSTEM (SALES CODE REC) — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate.

  • Page 183: Clock Setting Procedure

    Navigation Radio with CD Player and MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with a color screen to provide maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes. The unit also provides an AM/FM stereo radio and six-disc CD changer with MP3 capability.

  • Page 184: Radio Operation

    184 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicles equipped with steering wheel mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC). The EVIC features a driver-interactive display. This is located in the instrument cluster below the speedometer. The VOLUME button controls the sound level of the sound system.

  • Page 185: Tape Player Operation

    Tape Player Operation Press the top of the SCROLL button once to listen to the next track on the cassette. Press the bottom of the SCROLL button once to either listen to the beginning of the current track or to listen to the beginning of the previous track if it is within 5 seconds after the current track begins to play.

  • Page 186: Cd/Dvd Disc Maintenance

    186 UNDERSTANDING YOUR INSTRUMENT PANEL 5. A loose tape should be corrected before use. To rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the required directions. Maintain your cassette tape player. The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played.

  • Page 187: Radio Operation And Cellular Phones

    RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
  • Page 188 188 UNDERSTANDING YOUR INSTRUMENT PANEL Press this button to turn on and off the air condi- tioning. Cool dehumidified air comes through the outlets selected by the mode selector. Press the button a second time to turn off the air conditioning. The button includes an LED that illuminates when compres- sor operation is selected.
  • Page 189 Temperature Control The temperature of air can be selected by rotating the temperature control knob in the center. The coldest tem- perature setting is on the extreme left and the warmest setting on the ex- treme right of the rotation. The knob can be positioned at any point on the dial.

  • Page 190: Automatic Temperature Control - If Equipped

    190 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation The recirculation feature can be selected with the mode control knob. You may choose between Bi-Level Recirculation and Panel Recirculation air outlets while in this mode. Normally, air enters from outside the vehicle. How- ever, when in Recirculation mode air inside the vehicle is re-used.
  • Page 191 Automatic Temperature Controls Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occu- pants only.
  • Page 192 192 UNDERSTANDING YOUR INSTRUMENT PANEL The system will automatically control recircu- lation. However, pressing this button will tem- porarily put the system in recirculation mode (ten minutes). This can be used when outside conditions such as smoke, odors, dust, or high humidity are present.
  • Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 193...
  • Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can override the AUTO mode setting and select the direction of the air by rotating the right mode knob to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield.

  • Page 195: Summer Operation

    Press this button to turn on the rear window defroster and the heated side mirrors (if equipped). An LED in the button will illuminate when the rear window defroster is ON. The defroster automati- cally turns off after approximately 10 minutes of opera- tion for the first push of the button, and will turn off after approximately 5 minutes for the second push of the button.

  • Page 196: Winter Operation

    196 UNDERSTANDING YOUR INSTRUMENT PANEL glycol antifreeze coolant in water is recommended. Refer to section 7, Maintenance Procedures, of this manual for proper coolant selection. Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging.

  • Page 197: Operating Tips

    UNDERSTANDING YOUR INSTRUMENT PANEL 197 Operating Tips...

  • Page 199: Starting And Operating

    STARTING AND OPERATING CONTENTS Starting Procedures ....202 Normal Starting ..... . 202 Engine Block Heater —...
  • Page 200 200 STARTING AND OPERATING Compact Spare Tire — If Equipped ..234 Limited Use Spare — If Equipped ..235 Tire Spinning ......235 Tread Wear Indicators .
  • Page 201 Gross Vehicle Weight Rating (GVWR) ..252 Gross Axle Weight Rating (GAWR) ..252 Overloading ......253 Loading .

  • Page 202: Starting And Operating

    202 STARTING AND OPERATING STARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. WARNING! Do not leave animals or children inside parked vehicles in hot weather;...
  • Page 203 WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.

  • Page 204: Engine Block Heater - If Equipped

    204 STARTING AND OPERATING After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded, three-wire extension cord.
  • Page 205 WARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse.
  • Page 206 206 STARTING AND OPERATING The following indicators should be used to ensure that you have engaged the transmission shift lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. •...
  • Page 207 temperature of the transmission reaches the appropriate temperature. Refer to the “Note” under “Torque Con- verter Clutch” later in this section. If the transmission temperature gets too hot, the transmission may downshift out of Overdrive or en- gage overdrive at higher vehicle speeds until the transmission cools down.
  • Page 208 208 STARTING AND OPERATING gear. When the vehicle speed drops or during accelera- tion, the clutch automatically and smoothly disengages. NOTE: • The torque converter clutch will not engage until the transmission fluid and engine coolant is warm (usu- ally after 1–3 miles (1.6–4.8 km) of driving). Because engine speed is higher when the torque converter clutch is not engaged, it may seem as if the transmis- sion is not shifting into “Overdrive”...

  • Page 209: Speed Automatic Transmission

    5 Speed Automatic Transmission Gear Selector STARTING AND OPERATING 209 WARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle you should shift the transmission into Park, remove the key from the ignition, and apply the park brake.
  • Page 210 210 STARTING AND OPERATING Park Position The PARK position is to be used when parking the vehicle. Engage only with the vehicle stopped. The PARK position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always use the parking brake in addition to placing the selector lever in PARK to secure the vehicle.
  • Page 211 Neutral No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). Do not engage in NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.g., on icy roads). The engine may be started in this range.
  • Page 212 212 STARTING AND OPERATING NOTE: To avoid overrevving the engine when the selector lever is moved in “D -” direction, the transmis- sion will not shift to a lower gear if the engine’s revolu- tions per minute limit would be exceeded. Briefly press the selector lever in the “D +”...
  • Page 213 A reset feature is available to allow the vehicle to be driven to a dealer for service. To reset the transmission, use the following procedure: 1. Stop the vehicle. 2. Move the selector lever to the PARK position. 3. Turn off the engine. 4.

  • Page 214: Automatic Transmission - General Information

    214 STARTING AND OPERATING Automatic Transmission — General Information CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
  • Page 215 self-calibrating. Therefore, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pre- cision shifts will develop within a few shift cycles. WARNING! It is dangerous to shift the selector lever out of PARK or NEUTRAL if the engine speed is higher than idle speed.

  • Page 216: Autostick - If Equipped

    216 STARTING AND OPERATING Brake Transmission Shift Interlock System This vehicle is equipped with a brake transmission shift interlock system (BTSI) that holds the gearshift lever in the P (Park) position when the ignition switch is in the LOCK position. To move the gear selector lever out of the P (Park) position, the ignition switch must be turned to the ON position, and the brake pedal must be depressed.

  • Page 217: Parking Brake

    You can shift in or out of the autostick mode at any time without taking your foot off the accelerator pedal. If you choose the Overdrive mode, the transmission will oper- ate automatically; shifting between the five available gears. When you wish to engage autostick, simply move the shift lever to the Right or Left (D+/D-) position while in DRIVE.
  • Page 218 218 STARTING AND OPERATING Parking Brake Release When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.

  • Page 219: Brake System

    BRAKE SYSTEM In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be much greater than that required with the power system operating.
  • Page 220 220 STARTING AND OPERATING WARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
  • Page 221 ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into Anti-lock: •...

  • Page 222: Power Steering

    222 STARTING AND OPERATING POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason, the power assist is interrupted, it will still be possible to steer your vehicle.

  • Page 223: Multi Displacement System (Mds) - 5.7L Engine Only

    MULTI DISPLACEMENT SYSTEM (MDS) - 5.7L Engine Only This feature offers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills required. NOTE: The MDS system may take some time to return to full functionality after a battery disconnect.
  • Page 224 224 STARTING AND OPERATING Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
  • Page 225 Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions.

  • Page 226: Tire Identification Number (Tin)

    226 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.

  • Page 227: Tire Loading And Tire Pressure

    Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire Placard Location STARTING AND OPERATING 227 Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the:...
  • Page 228 228 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information”...
  • Page 229 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage and towing capacities of your vehicle with varying seating configurations and STARTING AND OPERATING 229...
  • Page 230 230 STARTING AND OPERATING...

  • Page 231: Tires-General Information

    WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES—GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.

  • Page 232: Tire Inflation Pressures

    232 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Underinflation also increases tire rolling resistance and results in higher fuel consumption.
  • Page 233 CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure”.

  • Page 234: Radial-Ply Tires

    234 STARTING AND OPERATING WARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).

  • Page 235: Limited Use Spare - If Equipped

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spare tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the...

  • Page 236: Tread Wear Indicators

    236 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed.

  • Page 237: Life Of Tire

    Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.

  • Page 238: Alignment And Balance

    238 STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.

  • Page 239: All Wheel Drive - If Equipped

    ALL WHEEL DRIVE — IF EQUIPPED This feature provides full time All Wheel Drive (AWD) with Antilock Brake System (ABS)/Traction Control. The front wheels provide 38% of the torque, and the rear wheels provide 62% of the torque. The system is auto- matic with no driver inputs or additional driving skills required.
  • Page 240 240 STARTING AND OPERATING tire pressures is low. The Tire Pressure Monitoring Tell- tale Light will flash on and off for 10 to 60 seconds when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and reset.

  • Page 241: Tire Pressure Monitoring - Premium

    NOTE: • The TPMS can inform the driver of a low tire pressure condition. • The TPMS is not intended to replace normal tire care and maintenance, nor to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure.

  • Page 242: Check Tpm System

    242 STARTING AND OPERATING Modules mounted in three of the four wheel wells, various Tire Pressure Monitoring System Display Mes- sages in the EVIC, and Telltale Light. NOTE: For vehicles with optional wheel/tire sizes and significantly different tire placard pressures, the placard pressure value and the low-pressure threshold value is re-programmable at your authorized dealer to accommo- date the customer selected wheel/tire combinations rec-...

  • Page 243: General Information

    CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style. After-market wheels can cause sensor damage.

  • Page 244: Tire Chains

    244 STARTING AND OPERATING The tire pressure sensors are covered under one of the following licenses: United States ..... KR5S120123 Canada .

  • Page 245: Snow Tires

    NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufacture suggest a maximum speed.

  • Page 246: Fuel Requirements

    246 STARTING AND OPERATING Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed. The suggested rotation method is the “forward-cross” shown in the following diagram.

  • Page 247: Spark Knock

    If you experience these symptoms, try another brand of “regular” gasoline be- fore considering service for the vehicle. Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the World Wide Fuel Charter, WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle.

  • Page 248: Mmt In Gasoline

    248 STARTING AND OPERATING Problems that result from using methanol/gasoline blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber.

  • Page 249: Carbon Monoxide Warnings

    malfunctioning and may require immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now being sold as octane enhancers are not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives are not the responsibility of the manufacturer.

  • Page 250: Adding Fuel

    250 STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
  • Page 251 CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. When the fuel nozzle “clicks” or shuts off, the fuel tank is full. NOTE: • Tighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is properly tightened.

  • Page 252: Vehicle Loading

    252 STARTING AND OPERATING VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow. This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying cargo, do not exceed the specified GVWR and GAWR.

  • Page 253: Overloading

    Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GAWR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.

  • Page 254: Trailer Towing

    254 STARTING AND OPERATING Empty Weight Load (Including driver, pass- sengers and cargo) Total GAWR TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully re- view this information to tow your load as efficiently and safely as possible.
  • Page 255 WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Tongue Weight (TW) The downward force exerted on the hitch ball by the trailer.

  • Page 256: Trailer Hitch Classification

    256 STARTING AND OPERATING Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your dealer for package content and for a trailer hitch engineered specifically for your vehicle.

  • Page 257: Trailer Towing Weights (Maximum Trailer Weight Ratings)

    Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area 2.7L Automatic 22 SQ. FT. (2.04 square 22 SQ. FT. (2.04 square 22 SQ. FT. (2.04 square 22 SQ.
  • Page 258 258 STARTING AND OPERATING Engine/Transmission 5.7L Automatic with 40 SQ. FT. (3.72 square trailer tow package 40 SQ. FT. (3.72 square 40 SQ. FT. (3.72 square 40 SQ. FT. (3.72 square Refer to local laws for maximum trailer towing speeds. NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire...

  • Page 259: Trailer And Tongue Weight

    Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer.

  • Page 260: Towing Requirements

    260 STARTING AND OPERATING Towing Requirements To promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom- mended: CAUTION! • Avoid towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle.
  • Page 261 • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or chock the trailer wheels. • GCWR must not be exceeded. •...
  • Page 262 262 STARTING AND OPERATING Towing Requirements — Trailer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. − An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes.

  • Page 263: Towing Tips

    The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. 4 - Pin Connector STARTING AND OPERATING 263 7 - Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
  • Page 264 264 STARTING AND OPERATING NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve perfor- mance and extend transmission life by reducing exces- sive shifting and heat build up. This action will also provide better engine braking. The automatic transmission fluid and filter should be changed if you REGULARLY tow a trailer for more than 45 minutes of continuous operation.

  • Page 265: Recreational Towing (Behind Motorhome, Etc.)

    − Highway Driving Reduce speed. − Air Conditioning Turn off temporarily. − refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. STARTING AND OPERATING 265 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not recommended.

  • Page 267: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....268 If Your Engine Overheats ....268 Jacking And Tire Changing .

  • Page 268: Hazard Warning Flasher

    268 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. Hazard Flasher Switch To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer- gency.

  • Page 269: Jacking And Tire Changing

    removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to floor, and the fan control to HI. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system.

  • Page 270: Preparations For Jacking

    270 WHAT TO DO IN EMERGENCIES WARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.

  • Page 271: Jack Location/Spare Tire Stowage

    WHAT TO DO IN EMERGENCIES 271 Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover under the rear cargo floor — if equipped. Follow these steps to access the jack and spare tire. NOTE: The spare tire must be removed in order to access the jack.
  • Page 272 272 WHAT TO DO IN EMERGENCIES Lifting The Access Cover • Remove the fastener securing the spare tire. Spare Tire Fastener • Remove the spare tire. • Remove the fastener securing the jack.

  • Page 273: Jacking And Changing A Tire

    Jack Fastener Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked. WHAT TO DO IN EMERGENCIES 273 2. Remove the spare tire, jack and lug wrench. 3.
  • Page 274 274 WHAT TO DO IN EMERGENCIES 4. Before raising the vehicle loosen, but do not remove, the lug nuts of the flat tire using the lug wrench. Turn the wheel nuts counterclockwise one turn while the wheel is still on the ground. 5.
  • Page 275 WHAT TO DO IN EMERGENCIES 275 Jack Engagement Locations...

  • Page 276: Compact Spare Tire-For Temporary Emergency Use Only

    276 WHAT TO DO IN EMERGENCIES 7. Remove the lug nuts, wheel cover (if equipped) and tire. Remove the cover by hand, do not pry off. 8. Mount the spare tire. For vehicles equipped with wheel covers, see the wheel cover installation instruc- tions.

  • Page 277: Wheel Cover Installation (If Required)

    Wheel Cover Installation (If Required) 1. Tighten the two lug nuts on the mounting studs on each side of the stud which is in alignment with the valve stem. 2. Align the valve notch in the wheel cover with the valve stem on the wheel.
  • Page 278 278 WHAT TO DO IN EMERGENCIES WARNING! • Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- mission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.

  • Page 279: Driving On Slippery Surfaces

    of the vehicle with the discharged battery. Make sure you have a good contact on the engine ground. Refer to the following illustration for jump starting connections. Jump Starting 6. Start the engine in the vehicle which has the booster battery, let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery.

  • Page 280: Freeing A Stuck Vehicle

    280 WHAT TO DO IN EMERGENCIES partial or complete loss of vehicle control and stopping ability. To reduce this possibility, the following precau- tions should be observed: 1. Slow down during rainstorms or when roads are slushy. 2. Slow down if road has standing water or puddles. 3.

  • Page 281: Towing A Disabled Vehicle

    WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed.

  • Page 282: Without The Ignition Key

    282 WHAT TO DO IN EMERGENCIES CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • The only approved method of towing is with a flat bed truck.

  • Page 283: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS 2.7L Engine ......285 3.5L Engine ......286 5.7L Engine .
  • Page 284 284 MAINTAINING YOUR VEHICLE Body Lubrication ..... 302 Windshield Wiper Blades ....303 Windshield Washers .

  • Page 285: 2.7L Engine

    MAINTAINING YOUR VEHICLE 285 2.7L ENGINE 2.7L Engine Compartment...

  • Page 286: Maintaining Your Vehicle

    286 MAINTAINING YOUR VEHICLE 3.5L ENGINE 3.5L Engine Compartment...

  • Page 287: L Engine

    MAINTAINING YOUR VEHICLE 287 5.7L ENGINE 5.7L Engine Compartment...

  • Page 288: Onboard Diagnostic System - Obd Ii

    288 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.

  • Page 289: Emissions Inspection And Maintenance Programs

    EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and Maintenance) requirement, this check verifies the following: the MIL (Malfunction Indicator Light) is functioning and is not on when the engine is running, and that the OBD (On Board Diagnostic) system is ready...

  • Page 290: Replacement Parts

    290 MAINTAINING YOUR VEHICLE If your OBD system is not ready, you should see your authorized dealer or repair facility. If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update.

  • Page 291: Maintenance Procedures

    WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
  • Page 292 292 MAINTAINING YOUR VEHICLE Engine Oil Dipstick CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Checking Oil Level — 5.7L Engines To assure proper engine lubrication, the engine oil must be maintained at the correct level.
  • Page 293 CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage. Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed.
  • Page 294 294 MAINTAINING YOUR VEHICLE recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API).
  • Page 295 engine oil viscosity chart. SAE 5W-30 Engine Oil is allowed for use in the 3.5L Engine during cold weather only to improve cold weather starting. 10W-30 OIL VISCOSITY CHART The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the Engine Com- partment illustration in this section.

  • Page 296: Engine Oil Filter

    296 MAINTAINING YOUR VEHICLE environment. Contact your dealer, service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.

  • Page 297: Engine Air Cleaner Filter

    Engine Air Cleaner Filter Under normal driving conditions, replace the air filter at the intervals shown on Schedule “A.” If, however, you drive the vehicle frequently under dusty or severe con- ditions, the filter element should be inspected periodi- cally and replaced if necessary at the intervals shown on Schedule “B.”...
  • Page 298 298 MAINTAINING YOUR VEHICLE CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly. Contin- ued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the...

  • Page 299: Maintenance-Free Battery

    • Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently sealed.

  • Page 300: Air Conditioner Maintenance

    300 MAINTAINING YOUR VEHICLE WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water.

  • Page 301: A/C Air Filter - If Equipped

    WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information.

  • Page 302: Power Steering - Fluid Check

    302 MAINTAINING YOUR VEHICLE Refer to the “Maintenance Schedules” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.

  • Page 303: Windshield Wiper Blades

    underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year, preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar Lock Cylinder Lubricant or equivalent directly into the lock cylinder.

  • Page 304: Exhaust System

    304 MAINTAINING YOUR VEHICLE Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken,...

  • Page 305: Cooling System

    Cooling System WARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. •...
  • Page 306 306 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner.
  • Page 307 extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) coolant. When adding coolant, a minimum solution of 50% rec- ommended Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technol- ogy), or equivalent, in water should be used.
  • Page 308 308 MAINTAINING YOUR VEHICLE Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground.

  • Page 309: Hoses And Vacuum/Vapor Harnesses

    • If frequent coolant additions are required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pres- sure tested for leaks. • Maintain coolant concentration at 50% HOAT engine coolant (minimum) and distilled water for proper corrosion protection of your engine which contains aluminum components.

  • Page 310: Brakes

    310 MAINTAINING YOUR VEHICLE Brakes In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the Mainte- nance Schedules section of this manual. WARNING! Riding the brakes can lead to brake failure and possibly an accident.

  • Page 311: Brake Fluid Level Check

    WARNING! Worn brake hoses can burst and cause brake failure. You could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately. Brake Fluid Level Check The fluid level in the master cylinder should be checked when performing underhood services, or immediately if the brake system warning light indicates system failure.

  • Page 312: Fuel System Hoses

    312 MAINTAINING YOUR VEHICLE CAUTION! Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure. Fuel System Hoses Electronic Fuel Injection high pressure fuel systems are designed with hoses and quick connect fittings which have unique material characteristics to provide adequate sealing and resist attack by deteriorated gasoline.

  • Page 313: All Wheel Drive (Awd) - If Equipped

    CAUTION! The fluid level is preset at the factory and does not require adjustment under normal operating condi- tions. If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe damage to the transmission may occur. Your authorized dealer has the proper tools to accurately adjust the fluid level.

  • Page 314: Front And Rear Wheel Bearings

    314 MAINTAINING YOUR VEHICLE Fluid Changes The fluid should be changed as follows: Normal Usage No Service Required Severe Usage Front Differential No Service Required Transfer Case Refer to Maintenance Schedule “B” Severe Usage is defined as: 1. More than 50% of vehicle operation in stop and go traffic where vehicle is driven regularly for more than 45 minutes of continuous operation, such as in heavy city or in construction zone traffic.
  • Page 315 • Stone and gravel impact. • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using Mopar Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
  • Page 316 316 MAINTAINING YOUR VEHICLE • All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil, use Mopar select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush or metal polishes.

  • Page 317: Cleaning The Center Console Cup Holders

    WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopar Glass Cleaner or any commercial household-type glass cleaner.

  • Page 318: Power Distribution Centers

    318 MAINTAINING YOUR VEHICLE • Soak the rubber cup holder liner in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour. • After one hour pull the liner from the water and dip it back into the water about six times.
  • Page 319 CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center, and possibly result in a electrical system failure.
  • Page 320 320 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits — — 25 Amp Powertrain Control Module (PCM) Clear 25 Amp Injectors, Ignition Coils Clear — — 30 Amp Antilock Brakes System (ABS) Pink Valves/Powertrain Control Module (PCM) 30 Amp Windshield Wiper/Washer Pink 50 Amp Radiator Fan 20 Amp...

  • Page 321: Rear Power Distribution Center

    MAINTAINING YOUR VEHICLE 321 Rear Power Distribution Center There is also a power distribution center located in the rear compartment under the spare tire access panel. This center contains fuses and relays. Rear Power Distribution Center Opening The Access Panel...
  • Page 322 322 MAINTAINING YOUR VEHICLE CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center, and possibly result in a electrical system failure.
  • Page 323 Cavity Fuse Circuits 25 Amp Cluster - without power memory C/BRKR seat/Driver Seat Switch - with power memory seat/Memory Module - if equipped 25 Amp Passenger Seat Switch C/BRKR 25 Amp Door Modules - except base/ C/BRKR Driver Door Lock Switch - base/ Driver Express Power Window Switch - if equipped/Passenger Door Lock Switch - base...
  • Page 324 324 MAINTAINING YOUR VEHICLE Cavity Fuse Circuits 10 Amp Door Modules/Power Mirrors - if equipped/Steering Control Module — — — — — — — — 5 Amp Amplifier - if equipped/ Orange Antenna/Ignition Delay/ Overhead Console - if equipped/ Passenger Door Lock & Express Power Window Switch - if equipped/Power Mirrors - if equipped/Rear Defrost...

  • Page 325: Vehicle Storage

    VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days you may want to take steps to protect your battery. You may: • Disconnect the negative cable from the battery. • Anytime you store your vehicle, or keep it out of service (i.e.

  • Page 326: Bulb Replacement

    326 MAINTAINING YOUR VEHICLE LIGHT BULBS — Exterior Low Beam Headlight ..... 9006 High Beam Headlight..... 9005 Front Park/Turn Light .
  • Page 327 MAINTAINING YOUR VEHICLE 327 • Replace the bulb and push into socket assembly. Reinstall the socket assembly, and turn clockwise. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.

  • Page 328: Tail/Stop, Turn Signal Light, And Backup Light

    328 MAINTAINING YOUR VEHICLE Tail/Stop, Turn Signal Light, and Backup Light 1. Open the liftgate. 2. Remove tail light access cover. 3. Push the tail light electrical connector locking tab to the side. 4. Disconnect the electrical connector. 5. Remove 1 wingnut from the back of the tail light assembly.
  • Page 329 MAINTAINING YOUR VEHICLE 329 7. Pull tail light assembly clear from vehicle to access bulbs. Turn bulb sockets counter-clockwise to remove. 8. Pull the appropriate bulb to remove it from the socket.

  • Page 330: License Light

    330 MAINTAINING YOUR VEHICLE 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly. 10. Close the liftgate. License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull the bulb from the socket.

  • Page 331: Fluids And Capacities

    FLUIDS AND CAPACITIES Fuel (approximate) 2.7 Liter Engines (87 Octane) 3.5 Liter Engines without All Wheel Drive (87 to 89 Octane) 3.5 Liter Engines with All Wheel Drive (87 to 89 Octane) 5.7 Liter Engines (87 to 89 Octane) Engine Oil-With Filter 2.7 Liter Engines (SAE 5W-20, API Certified) 3.5 Liter Engines (SAE 10W-30, API Certified) 5.7 Liter Engines (SAE 5W-20, API Certified)

  • Page 332: Fluids, Lubricants And Genuine Parts

    332 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (2.7 Liter) Engine Oil (3.5 Liter) Engine Oil (5.7 Liter) Spark Plugs Oil Filter (2.7 Liter) Oil Filter (3.5 Liter) Oil Filter (5.7 Liter) Fuel Selection (2.7 Liter) Fuel Selection (3.5 Liter) Fuel Selection (5.7 Liter) Fluids, Lubricants and Genuine Parts...

  • Page 333: Chassis

    Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Transfer Case Front Axle Fluids, Lubricants and Genuine Parts Mopar ATF+4 Automatic Transmission Fluid or equivalent. Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
  • Page 335 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..336 Maintenance Schedules ....336 Schedule “B” ......339 Schedule “A”...

  • Page 336: Emission Control System Maintenance

    336 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
  • Page 337 • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16.2 km). • More than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C). • Trailer towing. •...
  • Page 338 338 MAINTENANCE SCHEDULES At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accu- racy of the oil level reading.

  • Page 339: Schedule "B" 339

    SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an •...
  • Page 340 340 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 341 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 342 342 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 343 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 344 344 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 345 Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the engine timing belt.
  • Page 346 346 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs.

  • Page 347: Schedule "A

    SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Replace the spark plugs. 5.7L Engine. Inspect the front and rear brake linings and rotors.
  • Page 348 348 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs. 5.7L Engine. Check and Inspect the accessory drive belt and tensioner.
  • Page 349 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and ten- sioner.
  • Page 350 350 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs. 5.7L Engine. Check and replace, if necessary, the PCV valve.

  • Page 351: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......352 Prepare For The Appointment .

  • Page 352: Suggestions For Obtaining Service For Your Vehicle

    We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
  • Page 353 • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center. Any communication to the Manufacturer’s Customer Center should include the following information: •...

  • Page 354: Warranty Information (U.s. Vehicles Only)

    354 IF YOU NEED CONSUMER ASSISTANCE Service Contract You may have purchased a service contract for your vehicle to help protect you from the high cost of unex- pected repairs after your manufacturer’s new vehicle limited warranty expires. The manufacturer stands be- hind only the manufacturer’s Service Contracts.

  • Page 355: Reporting Safety Defects

    REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.

  • Page 356: Department Of Transportation Uniform Tire Quality Grades

    356 IF YOU NEED CONSUMER ASSISTANCE Corporation vehicles. A complete working knowledge of the vehicle, system and/or components is written in straightforward language with illustrations, diagrams and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and features.

  • Page 357: Treadwear

    Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100.
  • Page 358 358 IF YOU NEED CONSUMER ASSISTANCE WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
  • Page 359 INDEX...
  • Page 360 360 INDEX ABS (Anti-Lock Brake System) ... . . 219 Adding Engine Coolant (Antifreeze) ..306 Adding Fuel ......250 Adding Washer Fluid .
  • Page 361 Ball Joints ......302 Battery ....... 299 Jump Starting .
  • Page 362 362 INDEX Clean Air Gasoline ..... . 247 Climate Control ......187 Clock .
  • Page 363 Electric Remote Mirrors ....67 Electrical Power Outlets ....121 Electronic Speed Control (Cruise Control) .
  • Page 364 364 INDEX Flash-To-Pass ......100 Flat Tire Changing ..... . 269 Floor Console .
  • Page 365 Hands-Free Phone (UConnect™) ... . 68 Hazard Warning Flasher ....268 Head Restraints ......92 Headlights High Beam .
  • Page 366 366 INDEX Key-In Reminder ......12 Keyless Entry System ..... 20 Keys .
  • Page 367 Capacities ......253 Tires ....... 227 Locks Door .
  • Page 368 368 INDEX Identification Logo ....294 Materials Added to ....295 Recommendation .
  • Page 369 Radio (Sound Systems) ....160,166 Rear Liftgate ......26 Rear Seat, Folding .
  • Page 370 370 INDEX Selection of Coolant (Antifreeze) ..306,332 Self-Sealing Tires ..... . . 239 Sentry Key (Immobilizer) .
  • Page 371 Tilt Steering Column ....104 Tire and Loading Information Placard Tire Identification Number (TIN) ... 226 Tire Markings .
  • Page 372 372 INDEX Trailer and Tongue Weight ....259 Wiring ......262 Trailer Towing Guide .
  • Page 373 INDEX 373 Power ......27 Windshield Defroster ....189,194 Windshield Washers .
  • Page 374 374 INDEX...
  • Page 375 NOTES...
  • Page 376 NOTES...

This manual is also suitable for:

2006 charger2006 magnum

Table of Contents

Save PDF