Removal Of Fuel Tank, Conveyors And Spoiler - Husqvarna TC 450 Workshop Manual

GENERAL OPERATIONS

Removal of fuel tank, conveyors and spoiler

Remove the saddle as described on page E.15.
TC-TXC
1
Remove the vent pipe (1) from the steering pin. Turn the ring nut of the fuel tap
(2) anticlockwise to stop fuel flowing and loosen the clamp (3) on the carburet-
tor fuel pipe; remove this pipe from the carburettor and pour the remaining fuel
into a container.
Loosen the fastening screws (6) of the fuel tank. Remove the screws (4) holding
conveyors to the tank; remove the conveyors (7), the screws (5) holding spoilers
(8) to radiators. Remove the spoilers and extract the tank.
2
3
6
4
4
5
7
4
8
Part. N. 8000 H1344 (10-2009) E.23