Gps Waas Smart Receiver Specifications - Standard Horizon CP300I Owner's Manual

18.2

GPS WAAS SMART RECEIVER SPECIFICATIONS

This GPS WAAS Smart Receiver is based on a ultimate GPS engine that delivers accuracy
better than three meters by decoding the GPS correction signals from the satellite-based
WAAS (Wide Area Augmentation System). The GPS engine, interface electronics and the
passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color
Dimensions
Weight (without cable)
Cable
Electrical Characteristics
Input Voltage
Input Current
GPS Receiver Sensivity
GPS Performance
Receiver
Geodetic Datum
Channels
Frequency
Acquisition Time
Reacquisition
Hot Start
Warm Start
Cold Start
Accuracy
GPS
DGPS
NMEA Output
Messages
GPS Chart Plotters
Ivory white
97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
0,35 lb (160 g)
white 15 meter 8x28AWG cable with 6 pins female connector
10 Vdc to 35 Vdc unregulated
0.8 Wmax
-143 dBm (typical)
WAAS (North America), EGNOS (Europe), MSAS (Asia)
WGS84
16
1575.42MHz (L1, C/A code)
< 1 second
< 3.5 seconds
< 33 seconds
< 40 seconds
< 2.5m
< 2.0m
GGA, RMC, GSA, GSV, TXT
Page 95