Smart Waas Receiver Specifications - Standard Horizon CP1000C Owner's Manual

14.1

SMART WAAS RECEIVER SPECIFICATIONS

This Smart DGPS WAAS receiver is based on a ultimate 12 channel GPS engine that
delivers accuracy better than three meters by decoding the GPS correction signals from the
satellite-based WAAS (Wide Area Augmentation System). The GPS engine, interface
electronics and the passive antenna are enclosed inside the water-proof plastic housing.
This provides advanced state of the art GPS performance in an easy to use package.
PHYSICAL CHARACTERISTICS
Color
Dimensions
Weight
Cable GPH 10
ELECTRICAL CHARACTERISTICS
Input Voltage
Input Corrent
GPS Receiver Sensivity : -145 dBW minimum
GPS PERFORMANCE
Receiver
Geodetic Datum
Channels
Frequency
ACQUISITION TIME (Approximate)
Reacquisition
Hot Start
Warm Start
Cold Start
ACCURACY
Position
Speed
NMEA OUTPUT MESSAGES/UPDATE RATE
GGA
GLL
VTG
RMC
GSA
GSV
PCMPD
Page 78
: Ivory white.
: 97mm in diameter x 32mm in height (flush mounted) or 61,5mm
on flag-pole mount.
: 160 grams (without cable).
: white 15 meter 8x28AWG cable with 6 pins female connector
: 10 Vdc to 35 Vdc unregulated.
: 112 mA @ 12 Vdc
60 mA @ 24 Vdc
45 mA @ 35 Vdc
: WAAS (North America), EGNOS (Europe), MSAS (Asia)
: WGS84
: 12
: 1575.42MHz (L1, C/A code)
: less than 1 second
: 8 seconds (typical)
: < 40 seconds (typical)
: < 45 seconds (typical)
: less than 10' (3m), 95% of the time
: 0.3 Knots RMS
: 1 second
: 1 second
: 1 second
: 1 second
: 3 seconds
: 3 seconds
: 1 second
GPS chartplotters