Gps Status Page; Gps Setup Menu; Waas/Egnos Setting - Standard Horizon CPN700i Owner's Manual

Multimedia chart plotters
Hide thumbs Also See for CPN700i:
Table of Contents

Advertisement

GPS Status Page

This page is used as a reference to see how well the GPS is receiving satellites.
1. Press the
2. Tap on GPS. The GPS Status page appears. Data Boxes can be customized, except
for Latitude, Longitude and GPS Status.
The WAAS/GPS Icon Area
ACQUIRING
: the GPS is trying to receive a valid position fix.
GPS2D
: the GPS is receiving at least 2 satellites.
GPS3D
: the GPS is receiving at least 3 satellites.
WAAS 2D/3D : the GPS is receiving a 2D or 3D position and the correction from the WAAS satellite.

GPS Setup Menu

From this page it is possible to activate the GPS Setup menu
1.
Firstly a tap anywhere on the screen for the Soft Keys to appear is needed (they are not
displayed on the page by default and permanently). Then tapping on the
Soft Key brings up the GPS Setup menu
GPS Source
Restart GPS
Navigation Speed
Speed Filter
Diff Correction Source
2. Tap on the preferred item.
3. Press the
1
The GPS Setup menu changes depending if the internal or external GPS is detected and switched on,
and also can be different depending on the type of the external GPS used.

WAAS/EGNOS Setting

From the GPS Status page it is possible to disable the WAAS/EGNOS setting following this
procedure:
Page 96
key, tap on Navigation.
may change due to the satellite reception:
: Allows setting the GPS Source among Internal Antenna, External Antenna and
Second CPN. The default setting is Internal Antenna.
: Restarts all GPS processes. Once executed, the message "Done" is shown.
: Allows setting the Navigation Speed (SOG update) among Low and High. The default
setting is High.
: Allows to resolve erratic speed readings in rough seas. Available values are Off, Low,
Medium, High. The default setting is Off.
: Allows setting what kind of Differential Correction will be used by the GPS between
WAAS/EGNOS and None. The default setting is WAAS/EGNOS.
key to exit the menu.
1
following this procedure:
1
See the following table:
.
Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpn1010i

Table of Contents