Underwater Objects Settings; Navigation; Highway Page - Standard Horizon CPN700i Owner's Manual

Multimedia chart plotters
Hide thumbs Also See for CPN700i:
Table of Contents

Advertisement

Underwater Objects Settings

The following selections are used to control which Underwater Objects are shown on the
Chart page.
Underwater Object Limit
Rocks
Obstructions
Diffusers
Wrecks
1
The Underwater Objects shown on the chart display could be up to 3ft deeper than the entered value to
guarantee a safety tolerance margin.
2
Selections: ICON (the object icon is visible, in the range selected from "Underwater Object Depth Limit"
option); ICON+DEPTH (the object icon and the depth are visible, in the range selected from "Underwater
Object Depth Limit" option).
2.13.4 NAVIGATION PAGES
Pages contained on the Navigation Desktop are useful for navigating to a Waypoint or
viewing the status of GPS signals.
1. Press the
appear: HIGHWAY opens the Highway page, COMPASS opens the Compass page and
GPS opens the GPS Status page.

Highway Page

Shows a 3D Highway view of the vessel travelling through the water only when navigating
to a destination point, Mark or following a Route.
1. Press the
2.
Tap on HIGHWAY. The Highway page appears. Data Boxes on the Highway page can
be customized, except for GPS Status (see
3.
In the bottom left corner of the Highway page there is a small gray window (see
the following picture) which shows the Scale (width) of the Highway. The default width
is 0.2Nm however this may be changed by tapping a finger anywhere on the display to
show two Soft Keys. Tap on the
the scale of the Highway.
Page 94
1
: Selects the max depth value to display Underwater Objects. If value is set to 0ft, the Underwater
Objects are not shown on the chart display. If the depth value is set more than 0ft (i.e. 10ft), depth
information will be shown on the chart display from 0ft to the selected depth.
:
Sets Icon/Icon+Depth
:
Sets Icon/Icon+Depth
:
Sets Icon/Icon+Depth
of a submerged pipe that helps diffuse material into the water, i.e. discharge or
wastewater, and can be an obstruction to navigation).
:
Sets Icon/Icon+Depth
key, tap on Navigation. In the bottom of the page the available selections
key, tap on Navigation.
2
for displaying Rocks.
2
for displaying Obstructions.
2
(a Diffuser is a structure usually found on top
for displaying Diffusers
2
for displaying Wrecks.
in the following picture).
Soft Key or on the
in
Soft Key to change
Owner's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpn1010i

Table of Contents