Marine Settings - Standard Horizon CP1000C Addendum

4. Move the ShuttlePoint knob up or down to select the preset and press [ENTER].
5. Press [CLEAR] or move the ShuttlePoint knob to the right until the Chart page is shown.
Setting
Names
Buoys ID
Nav-Aids
Light Sectors
Attention Areas
Tides & Currents
Seabed Type
Ports & Services
Tracks & Routes
Underwater Objects
Depth Range
Depth Range Min
Depth Range Max
Rocks Min
Rocks Max
Land Elevation Data
Roads
Points Of Interest
Lat/Lon Grid
Chart Boundaries
Mixing Levels
Value Added Data
3.1.1

Marine Settings

To control the display on the map of the marine features.
Names : Turns the Local area names On or Off.
Buoys ID : Turns the Buoy number On or Off.
Nav-Aids : Turns the presentation of Lights, Signals, Buoys and Beacons On or Off. When Off the Dynamic
Light Sectors : Turns the light sectors of all fixed lights, buoys and light houses On or Off.
Attention Areas : Turns the displaying of Attention Areas (areas in which special attention by the mariner is
Tides + Currents : Turns the displaying of Tides and Currents On or Off.
Seabed Type : Turns the displaying of the Seabed type On or Off.
Ports + Services : Turns the displaying of Ports and serice icons On of Off. Areas along the shore with facilities
Tracks + Routes : Turns displaying of underwater objects On or Off. Objects are obstructions, wrecks, cable etc.)
Underwater Objects : Turns displaying of underwater objects On or Off. Objects are obstructions, wrecks, cable etc.)
Page 12
Full Medium
On
On
On
On
On
On
On
On
On
On
On
0 Ft
1000 Ft 1000 Ft
0 Ft
1000 Ft 1000 Ft
On
On
On
On
On Auto
On
On
Nav-Aids will be set to Off.
required because of natural or man-made hazards sailing regulations and restrictions) On or
Off..
When data/time is available, Tidal stream arrows are shown on the charts, indicating the
direction and strength of the Tide. If no data/time is available from the GPS or the chart plotter
is not in Simulation mode, the icon on the map is generic one. The color of the arrow denotes
the strength of the current as follows:
When the chart plotter receives a valid position fix, the Tide icons are shown on the charts on
the basis of the current date and time: the screen displays and changes arrows as date/time
changes.
for mooring, downloading and uploading of ships, generally sheltered from waves and winds.
Port installations are piers, wharves, pontoons, dry docks, cranes...).
Low
On On
Off Off
On On
Off Off
On Off
Off Off
Off Off
On Off
Off Off
On Off
On On
0 Ft 0 Ft
1000 Ft
0 Ft 0 Ft
1000 Ft
Off Off
Off Off
Off Off
Off Off
Off
Off Off
Off Off
RADAR Tides
On On
Off Off
On Off
Off Off
Off Off
Off On
Off Off
On Off
Off Off
Off Off
Off On
0 Ft 0 Ft
1000 Ft 1000 Ft
0 Ft 0 Ft
1000 Ft 1000 Ft
Off Off
Off Off
Off Off
Off Off
Off Off
Off Off
Off Off
Custom
(Default values)
On
On
On
On
On
On
On
On
On
On
On
0 Ft
1000 Ft
0 Ft
1000Ft
On
On
On
On
On
On
On
ADDENDUM