4.8.5 Specifying UDP event logging
1. Click System Log.
The messages are sent via UDP packets to the Syslog port (514) of the specified host.
n
It is up to the host program to listen to these messages for processing.
n
A syslog host program is necessary to use this method, such as, Kiwi Syslog Daemon or
n
WinSysLog.
2. Click the link for the log name you want to view or configure (the default choices are log1 or log2).
3. Select the UDP Syslog option.
4. Enter a valid IP address or domain name.
5. Click Submit.
6. Log in as a root user if you are prompted.
Note: Changes in settings are only accepted after you have successfully logged in.
32
Ethernet web pages - standard procedures
L001675, 1.2
July 2019