Setting The Orientation; Specifying The Number Of Copies; Selecting The Diagnostics Button; Printing A Test Print Image - HID HDP5000 User Manual

3.1.3

Setting the Orientation

Select either the Portrait or Landscape radio buttons for Orientation.
Step Procedure
Select Portrait to cause the card to print in a vertical orientation.
1
OR
Select Landscape to cause the card to print in a horizontal orientation.
3.1.4 Card Hopper Selection
Specifies which hopper the printer feeds a card. Selecting Hopper Top allows the printer to
feed from the top hopper. Selecting Hopper Bottom allows the printer to feed from the bottom
hopper. First available feeds a card from the last successful hopper location first, and then
switches to the other hopper.
3.1.5

Specifying the Number of Copies

Specifies the number of copies to be printed
The upper limit is 10000 and the lower limit is 1.
3.1.6

Selecting the Diagnostics button

Click Diagnostics to launch the WorkBench Printer Utility.
3.1.7

Printing a Test Print Image

Click Test Print to test the printer.
Step Procedure
1 Install a compatible ribbon in the Printer for the Test Print.
2 Open the Driver settings.
a. From your computer's startup menu, select Settings > Printers and Faxes.
b. Double-click the Printer under the Printer's window.
c. Select Printing Preferences under the Printer drop-down menu. Note: This brings up the
Printing Preferences window.
Select the Card tab, and then click Test Print.
3 a.
When selecting the Test Print button, an image is copied to the Printer.
b.
3.1.8 Selecting About
Select About to open a dialog box containing the Copyright, Driver Version and Date.
Page 16 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013