3.12.8 Using the Character Parity Mode dropdown list
Use this option to customize the Encoding Mode (used to encode the magnetic data on the
currently selected track).
Step
Procedure
Select No Parity to change the Character Parity to none.
1
OR
Select Even Parity to change the Character Parity to Even Parity.
OR
Select Odd Parity to change the Character Parity to Odd Parity. (Note: This is the default for all
tracks.)
3.12.9 Reviewing the ISO Track Locations
The magnetic Encoding Module encodes onto tracks in accordance with an ISO 7811-2
Magnetic Stripe.
TRACK1
TRACK2
TRACK3
Page 54 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
0.223" 0.353" 0.493"
0.110"
0.110"
0.110"
© 2012, 2013 HID Global Corporation. All rights reserved
0.130"
0.140"
July 2013