Custom Encoding Or Raw Binary Encoding Mode - HID Fargo DTC1000Me User Manual

Window Tab
4.9.1.2

Custom Encoding or Raw Binary Encoding Mode

You can change the Magnetic Track options for Tracks 1, 2 and 3 when using the Custom Encoding
or Raw Binary Encoding Mode. These options are not available for ISO or JIS II encoding.
Window TAB
April 2014
DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
Select the Magnetic Track Selection option to
specify which track is to be configured through the
Magnetic Track Options.
This applies if the application being used requires
customization of the standard ISO encoding process.
Select 4 Bits to change the bits per character to 4 BPC.
Note: This is the default for Track 3.
Select 5 Bits to change the bits per character to 5 BPC.
Note: This is the default for Tracks 2 and 3.
Select 7 Bits to change the bits per character to 7 BPC.
Note: This is the default for Track 1.
Select 8 Bits to change the bits per character to 8 BPC.
Select NULL to change the ASCII Offset to NULL.
Select SPACE to change the ASCII Offset to SPACE.
Note: This is the default for Track 1.
Select ZERO to change the ASCII Offset to ZERO.
Note: This is the default for Tracks 2 and 3.
Select 75 BPI to change the bits per inch to 75 BPI.
Note: This is the default for Track 2.
Select 128 BPI to change the bits per inch to 128 BPI.
Select 210 BPI to change the bits per inch to 210 BPI.
Note: This is the default for Tracks 1 and 3.
Select Custom BPI, which enables the custom BPI text box.
Note: The lower limit is 75 and upper limit is 210.
Select No LRC to change the LRC Generation to none.
Select Even Parity to change the LRC Generation to Even Parity.
Note: This is the default for all tracks.
Select Odd Parity to change the LRC Generation to Odd Parity.
Select No Parity to change the Character Parity to none.
Select Even Parity to change the Character Parity to Even Parity.
Select Odd Parity to change the Character Parity to Odd Parity.
Note: This is the default for all tracks.
Procedure
Procedure
Page 55