Matrix Outputs - SoundCraft Si Impact User Manual

CHANNELS & BUSSES
The Matrix busses feed the Matrix Master channels. Matrix Busses can be used for many things,
including a convenient way to send the same Mix to several monitor destinations at differing levels
or to use as an alternative main mix of mix groups to feed additional front of house ones.
Matrix Master channels receive their input from the Matrix (MT ) 1-4 busses, which can be fed by the MI 1-14 Mas-
ter channels and/or the Left, Right, and Mono main mix outputs.
The Matrix busses and masters are stereo, and the Matrix Master channels have two patchable stereo outputs each
(Left and Right of both outputs are interdependently patchable).
All Matrix channels include a
Phase), and they do not have a
Please note, Matrix Masters can not contribute to the MI 1-14 busses, F 1-4 busses, the Left/Right and Mono/Cen-
tre Main Mix busses, or themselves, so the MI , F , and MT FADER FOLLO
Channels assigned to Matrix Masters.
These offer naming, isolate, width, and physical output patching. See section 6.3.1.
User Manual
MATRI OUTPUTS
raphic Equaliser, though do not use the ACS mic/line input controls (48V,
ate processing element.
6.3: CHANNELS & BUSSES

6.3: MATRIX OUTPUTS

ain/Trim,
buttons are not applicable for Control
MATRI OUTPUTS