Equaliser Band Highlight; Band Field; Shelf Switch; Equaliser Field - SoundCraft VI6 User Manual

Equaliser Band Highlight

If you touch one or more parameter encoders, the corresponding Equaliser band(s) will be indicated by the
red overall graph being overwritten with a white graph that represents only the touched band(s). This is
useful for identifying which part of a curve is associated with which EQ bands. The representation will
return to the default when you leave the page.
Figure 4-9: The Equaliser Page After Touching An LF Encoder.

BAND Field

All four bands contain a GAIN, FREQ, Q encoder and an IN switch.
GAIN
Encoder adjusts the Gain in the range +/- 18 dB. {IN} enables the Equaliser band.
FREQ
Encoder adjusts the frequency in the range 20 Hz .. 20 kHz.
Q
Encoder adjusts the Q (Width) in the range 0.7 .. 15 only for BELL Mode.
IN Switch
{IN} enables this Equaliser band.

SHELF Switch

{SHELF} changes the response characteristic to SHELF. (12dB/oct)

EQUALISER Field

{IN} enables the full Equaliser section (without filters). For preparation, all Parameters including the band
IN switches can be set, even if the Equaliser is switched off.
Soundcraft Vi6™ User Guide Page 4 - 9