GAIN field
{encoder} adjusts the analogue input gain in the range from +15 dB to +70 dB.
{PAD} reduces the input sensitivity by 20 dB.
TRIM field
Encoder adjusts the digital Input Gain in the range +18/-36 dB
{LO CUT} inserts the pre AD converter analogue low cut filter (only analogue inputs).
LO CUT field
Encoder adjusts the Low cut frequency in the range 20 to 600 Hz.
{IN} switches the Low Cut filter in and out.
HI CUT field
Encoder adjusts the High cut frequency in the range 1k to 20kHz.
{IN} switches the Hi Cut filter in and out.
FORMAT field
If the Channel is paired, the Encoder adjusts the Stereo format, which can be:
LR / RL / LL / RR / MONO.
If the channel is not paired, this field is not displayed.
PAIRING field
If the Channel is paired the label of the paired channel is visible.
{Its VST config button} enters the pairing configuration.
PHANTOM field
{48V} enables the Phantom Power (+ 48 V) for the XLR patched to this input.
PHASE field
{INV} inverts the phase of this channel (180 Degrees).
IN1 PATCH field
Displays the source name that is patched to IN1.
{Its VST config button} opens the IN1 patch page (see chapter 10).
IN2 PATCH field
Displays the Source name that is patched to IN2.
{Its VST config button} opens the IN2 patch page (see chapter 10).
CH Label field
Displays the channel label.
{Its VST config button} opens the channel label configuration page.
DLY field
Encoder changes the input delay in the range 0.. 100 mS.
{IN} enables the delay function.
Soundcraft Vi6™ User Guide
Page 4 - 5