Sound/Screen Setting; Silent Mode; Ring Tone; Adjust Volume - Docomo Style series F-10C Instruction Manual

Sound/Screen Setting

Sound settings
You can set tones, such as changing a ring alert,
adjusting the volume, or muting the sound
emitted from FOMA terminal.

Ring tone

You can set your favorite melody for a ring alert or
alarm.
<Example> Setting voice call ring tone
meh Settingeb Sound/Vibration/
a
Mannerea Ring toneea Call ring tone
eSet required itemseC [Set]
Point
When Voice call ring tone is set, the setting applies to
Incoming call.
Some music or moving pictures/i-motion may not be
set to the ring alert.

Adjust volume

You can set the volume of a ring alert, alarm sound, etc.
meh Settingeb Sound/
a
Vibration/Mannerec Adjust volume
eSet required itemsek
[Set]

Vibration mode

You are notified of an incoming call or alarm with
vibration, instead of sound.
meh Settingeb Sound/
a
Vibration/Mannered Vibration mode
eSet required
34
SDeg
or
itemse Select vibration

Silent mode

This function mutes the sound emitted from the
FOMA terminal such as ring alert, Keypad sound,
Open/Close sound, Alarm sound, confirmation
sound for reading a code with Bar code reader,
and notifies the incoming call with vibrator
(vibration). Also, microphone is sensitized in
Silent mode, and you can call in a small voice.
# (1 sec. or more)
a
appears on the stand-by display in Silent
mode.
Canceling Silent mode : # (1 sec. or more)
Point
Shutter sound, Auto focus lock sound for shooting
still pictures, and count down sound of Auto timer
are emitted even in Silent mode.

System sound

Set sounds emitted for key operation, opening/
closing the FOMA terminal, and shutter sound for
shooting still images or moving pictures
(including recording for Voice recorder).
a meh Settingeb Sound/
Vibration/Mannereb Other
d System soundeSet required items
e
Select sound
Point
The setting applies to the shutter sound for Camera
and Voice recorder.
soundse