Table of Contents
Advertisement
Chapter 5. Key Telephone Features
Operation
To make an outside call that requires an account code:
1. Lift the handset or press the ON/OFF key.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (10 digits max.).
4. Press the # key.
5. Press a vacant trunk key or enter a Trunk Access Code
(default = 9).
6. Dial the phone number.
Hardware Requirements
•
An Call Logging printer or external call accounting system is required to collect account code
records.
Considerations
•
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
•
Account codes will be cancelled after using trunk queuing.
•
Account Codes interact with TRS (Call Barring) as shown in the following table:
Forced or Not Forced
Not Forced
Forced
Attendant Group Calls
Description
You can call the attendant group from any extension by dialling the designated attendant number.
124
Action
Verified or
Non-Verified
Non-Verified
Extension Port Based TRS
Verified
Non-Verified
TRS (Call Barring) Class
for Forced Account Code
Verified
S-ICX (International) issued April 2002
Intercom dial tone
Enter Account # displays
Specified code displays
Specified account code # displays
Exchange Line Key LED lights
Dialled phone number displays
TRS (Call Barring) Class
No Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Extension Port Based TRS
(FF1 0 19 0001)
Account Code Based TRS
Section 700 - Operation
Result
Account Entry
Class
Class
Class
Class
S-ICX-64-700
Advertisement
Table of Contents
