Table of Contents
Advertisement
Chapter 5. Key Telephone Features
Feature Description
ACD-2 Wrap Key
Text Message Sent
Text Message Reply
Message and Voice Mail Key
Silent Monitor Key
Call Record Key
Room Monitoring Set Key
Room Monitoring Initiate Key
Handsfree Answerback
Description
Handsfree Answerback allows you to answer an intercom call without lifting the handset.
The System must be programmed for Voice Calling for you to use this feature. You must press 1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
1. When the intercom call arrives, confirm that the MIC LED
is off.
(If it is lit, press the MIC key to turn it off.)
2. Speak into the microphone to answer.
Hardware Requirements
•
N/A
Considerations
•
Handsfree Answerback can be used to respond to only voice calls from other extensions - not
tone calls.
•
Both the called and calling parties must belong to an Extension Class of Service (COS) that
allows Voice Calling.
164
REDIAL + Fixed Feature
Code + (additional digits to
program into key)
∗#88
∗75 + (Message code no. 0-9)
∗76 + (Message code no. 0-9)
Note: The following feature keys were added with Version 4.5
76 + (Ext. No. 0-9999)
77 + (Ext. No. 0-9999)
78 + (Ext. No. 0-9999)
∗#05
∗#06
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Default Flexible Feature Code
(if not listed, must use Fixed Feature
Code)
768
775
776
Result
S-ICX-64-700
Advertisement
Table of Contents
