Table of Contents
Advertisement
Section 700 - Operation
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle
exchange line from the MCO exchange line group by entering the MCO access code.
Operation
To seize an idle exchange line:
1. Lift the handset or press the ON/OFF key.
2. Enter the desired exchange line access number
(default = 9 or 81-84). (See Table 22.)
3. Dial the phone number.
Hardware Requirements
•
N/A
Considerations
•
The System supports up to 576 outside lines in a six-CCU configuration. These lines can be
divided into 99 different exchange line groups.
•
Each exchange line group can support up to 50 outside lines.
•
Each MCO Tenant Group can have up to 5 MCO exchange line access codes. System defaults for
MCO exchange line access codes are displayed in the following table.
•
MCO1 can have up to 5 exchange line groups assigned by the Advanced Exchange Line Group
feature.
•
MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 22. MCO Exchange Line Access Codes
MCO Group
MCO1
MCO2
MCO3
MCO4
MCO5
S-ICX-64-700
Action
Exchange Line Access
Code
9
81
82
83
84
S-ICX (International) issued April 2002
Chapter 6. DSLT Features
Result
Intercom dial tone
Outside dial tone
259
Advertisement
Table of Contents
