Table of Contents
Advertisement
Chapter 6. DSLT Features
Operation
To call an attendant group:
1. Lift the handset or press the ON/OFF key.
2. Enter the attendant pilot number (default = 0).
Hardware Requirements
•
N/A
Considerations
•
Up to 20 extensions can be included in an attendant group.
•
The attendant pilot number is flexible.
•
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialled.
•
Attendant calls are always tone calls (i.e., not voice calls).
Auto Repeat Dial
Description
If you press the REDIAL key while receiving busy tone on an outside call, the System automatically
redials the number. The System continues to redial the number at set intervals until the called number
answers, the caller hangs up, or the maximum of 15 redial attempts is made.
Operation
To use Auto Repeat Dial:
1. Press the ON/OFF key.
2. Enter an exchange line access code (default = 9 or 81-84).
3. Dial the phone number.
4. Press the REDIAL key.
Hardware Requirements
•
N/A
Considerations
•
N/A
220
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
Busy tone
System automatically redials number
S-ICX-64-700
Advertisement
Table of Contents
