Table of Contents
Advertisement
Section 700 - Operation
Operation
To make an outside call that requires an account code:
1. Lift the handset or press the ON/OFF key.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (10 digits).
4. Press a vacant Exchange Line key or enter an exchange line
access code (default = 9 or 81-84).
5. Dial the phone number.
Hardware Requirements
•
An Call Logging printer or external call accounting system is required to collect account code
records.
Considerations
•
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
•
Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
•
Account codes will be cancelled after using trunk queuing.
•
Account Codes interact with TRS (Call Barring) as shown in the following table:
Forced or Not Forced
Not Forced
Forced
Attendant Group Calls
Description
You can call the attendant group from any extension by dialling the designated attendant number.
S-ICX-64-700
Action
Verified or
Non-Verified
Non-Verified
Extension Port Based TRS
Verified
Non-Verified
Verified
S-ICX (International) issued April 2002
Intercom dial tone
TRS (Call Barring) Class
No Account Entry
Extension Port Based TRS
Class
TRS Class for Forced
Extension Port Based TRS
Account Code
(FF1 0 19 0001)
Chapter 6. DSLT Features
Result
Account Entry
Class
Account Code Based TRS
Class
Class
Account Code Based TRS
Class
219
Advertisement
Table of Contents
