Speed Dial Name Assignments - Panasonic S-ics Technical Manual

Chapter 5. Key Telephone Features
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be dialled.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialled.
8. Press the HOLD key when finished.
To use a PSD Key that links multiple SSDs:
1. If necessary, select the exchange line group (9 or 81-84).
(Normally the exchange line is selected by the speed dial
numbers.)
2. Press the PSD key.
To manually link speed dial keys together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the MEMORY key,
then enter the SSD bin number.
4. Use the one-touch keys or press the MEMORY key and
enter the SSD codes to dial the parts of the phone number
until it is completed.
Hardware Requirements
• N/A
Considerations
• N/A

Speed Dial Name Assignments

You can assign names to PSD numbers from a key telephone without entering the programming
mode. If allowed in the Extension Class of Service (COS), you can also assign names to SSD
numbers.
(PSD names can contain a maximum of 7 characters. SSD names can contain a maximum of 16
characters.)
192
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Stored PSDXXX displays
Result
Result
Intercom dial tone
S-ICX-64-700