Table of Contents
Advertisement
Chapter 6. DSLT Features
To transfer a call using OHVA:
1. While on a call, press the HOLD key.
2. Dial the extension number to which the call is being trans-
ferred.
3. Enter OHVA feature access code (default = 8) and
announce the call to be transferred.
4. If transfer is not accepted, press the FL/R key.
5. Replace the handset.
Hardware Requirements
•
N/A
Considerations
•
If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the
OHVA hangs up.
•
If the transferred call is not answered immediately, it will queue for a set time limit, then return
to the extension sending the OHVA by Transfer Recall Timer.
•
You cannot receive a Call Waiting message during an OHVA.
•
If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.
Onhook Dialling
Description
Onhook Dialling allows users to dial without lifting the handset. However, the Digital Single Line
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.
Operation
To use onhook dialling:
1. Press the ON/OFF key.
2. Enter an exchange line access code (default = 9 or 81-84),
or dial an extension number.
3. If you entered an exchange line access code in step 2, dial
the phone number. Otherwise, proceed to step 4.
4. When the call is answered, lift the handset to talk.
246
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Current call on hold
Busy signal
Transfer cancelled
Result
Intercom dial tone
S-ICX-64-700
Advertisement
Table of Contents
