Table of Contents
Advertisement
Section 700 - Operation
4. Make your announcement.
5. Replace the handset.
Meet-Me Answer
To answer a page using Meet-Me Answer:
1. Lift the handset.
2. Enter the Meet Me Answer code (default = ##).
Hardware Requirements
•
External relays, amplifier, and speakers are required for external paging.
Considerations
•
If an external paging system has been connected, pages can be made to Paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
•
An extension can belong to more than one paging group.
•
Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal unless your system allows Paging Override.
•
Beginning with Version 4.5 and higher, the paging system can be set to "timeout" if a page is
longer than the specified length of time (0 to 255 seconds). If this feature is set and the timeout
period has elapsed, the page originator's handset will emit a Fast Busy Tone.
Room Monitoring
Version 4.5 and higher
Description
This feature allows the user to monitor the sounds in a room from another extension or room. The
transmitter in the telephone handset is used as a remote "microphone" for monitoring these sounds.
To activate this feature, the monitored extension must enable the Room Monitor feature before the
monitoring extension can listen to the sounds in the room. The monitored extension can be enabled
using an SLT, DSLT, or Key Telephone. No special programming is required to allow an extension to
enable the monitored mode.
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 7. SLT Features
Result
Result
Intercom dial tone
Connected to specified party
293
Advertisement
Table of Contents
