Day 1/ Day 2/Night Delayed Ringing; Ddi (Did) Day/Night Ringing; Ddi (Did) Day/Night Busy/Delayed Ringing - Panasonic S-ics Technical Manual

Table of Contents

Advertisement

Section 700 - Operation
When the system is in Night mode, call can be directed to ring at one or more extensions or at a hunt
group per the Night ringing assignments.
Inbound calls can be directed to desired normal daytime locations by setting the system into a Day
mode. By having a second day mode (Day 2) alternative call handling is available during day
operation. For instance, during lunch, calls can be directed to an alternative position.
Calls can be directed specific night locations when the system is set to Night mode.
For more information on Day Ringing, see "Day/Night System Mode" on page 35.
Hardware Requirements
N/A
Considerations
N/A

Day 1/ Day 2/Night Delayed Ringing

Delayed Ringing causes an incoming outside call that is unanswered at a primary extension within a
certain period of time, to ring at a designated extension or extensions. Delayed ringing destinations
can be set for Day 1, Day 2 and Night modes. Exchange Line Delayed Ringing is also available for
hunt group pilot numbers.
Hardware Requirements
N/A
Considerations
N/A

DDI (DID) Day/Night Ringing

(Note: Analog DID is not available in the UK, TX or EX model).
Incoming DDI calls can be set to ring at day destinations when the system is in day mode and ring at
night destinations when the system is in night mode.
Hardware Requirements
DDI (DID) Trunk Card
Considerations
N/A

DDI (DID) Day/Night Busy/Delayed Ringing

DDI Day/Night Busy/Delayed Ringing causes an incoming DDI call to a busy primary extension to
ring at a designated extension or extensions. DDI Busy/Delayed Ringing also causes an incoming
DDI call that is unanswered at a primary extension within a certain period of time, to ring at a
designated extension or extensions. Separate ring destinations are available for day and night modes.
DDI Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DDI Busy/Delayed
Ringing destination.
S-ICX-64-700
S-ICX (International) issued April 2002
Chapter 3. System Features
59

Advertisement

Table of Contents
loading

Table of Contents