Table of Contents
Advertisement
Chapter 3. System Features
Hardware Requirements
•
See Section 565 - Network BLF Display System Administrator Manual.
Considerations
•
See Section 565 - Network BLF Display System Administrator Manual.
Network Facilities
Description
The System supports networking facilities such as:
•
Network Attendant Reversion
•
Network Call Forward
•
Network Call Routing
•
Network Call Transfer
•
Network Caller ID
•
Network Camp On / Call Waiting
•
Network Centralized Attendant
•
Network Centralized Voice Mail
•
Networking Extension Calling
•
Network Flash Transfer
•
Network Hold
•
Network Hold Recall
•
Network Paging
•
Network Transfer Recall
•
Tandem Calling
The system also supports Voice over IP Trunk networking , as described in "Voice over IP Trunk
Lines" on page 76. For more information, see 562 - VoIP-TRK Refererence for ICX and S-ICX.
For more information on System Networking, see the System Networking Reference Manual.
Feature availability depends on CPC version and system configuration/programming. For more
information on System Networking, see the System Networking Reference Manual.
For more information about QSIG, see "QSIG ISDN Lines" on page 58.
Network Attendant Reversion
Network Attendant Reversion enables calls to revert to the attendant in the same CCU. Calls will not
revert if the CCU receiving the call has no attendant. Network Attendant Reversion does not work
with Network Hold.
54
S-ICX (International) issued April 2002
Section 700 - Operation
S-ICX-64-700
Advertisement
Table of Contents
