Table of Contents
Advertisement
Section 700 - Operation
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Hang up and then go off-hook to answer call.
Note: For details about handling multiple calls, see "Call Hold" on page 227.
Hardware Requirements
•
N/A
Considerations
•
The trunk call type may be either multiple ring, direct, or camp-on.
•
The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• The receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can
also transfer a held call to a busy extension after making the announcement using this feature.
Operation
To make an OHVA :
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the OHVA feature access code (default = 8).
4. Make your announcement
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 6. DSLT Features
Result
Result
Busy signal
245
Advertisement
Table of Contents
