Table of Contents
Advertisement
Section 700 - Operation
period has elapsed, the page originator's handset will emit a Fast Busy Tone and the words
"Paging Time Out" will be displayed on the originating telephone's display.
Ringing Line Preference
Description
Ringing Line Preference enables an extension to answer a ringing call by simply picking up the
handset or pressing the ON/OFF key.
Operation
To answer a call using Ringing Line Preference:
1. Lift the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
If disabled in Extension Programming, you must press the line key or enter the feature code for
incoming pick-up in order to answer a call.
Room Monitoring
Version 4.5 and higher
Description
This feature allows the user to monitor the sounds in a room from another extension or room. The
transmitter in the telephone handset is used as a remote "microphone" for monitoring these sounds.
To activate this feature, the monitored extension must enable the Room Monitor feature before the
monitoring extension can listen to the sounds in the room. The monitored extension can be enabled
using a SLT, DSLT, or Key Telephone. No special programming is required to allow an extension to
enable the monitored mode.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
183
Advertisement
Table of Contents
