Table of Contents
Advertisement
Chapter 3. System Features
Station Message Detail Recording (Call Logging)
Description
Station Message Detail Recording (SMDR) provides detailed call records of outgoing calls. This
record is printed on a serial printer connected to the RS-232C port. SMDR records can be output to a
printer or an external call accounting system.
Various types of information are reported on the SMDR record and each type of information occupies
a set position in the SMDR format. Three SMDR formats are available (See Figure 1 on page 63.)
One type of information is the "condition code" which occupies the first position in the output format.
This code specifies what type of call was made or received (e.g., DISA Incoming call [S] or Closed
Numbering call [W]). However, condition codes are prioritized, and the type of call determines what
code is displayed.
The following tables shows the priority of condition codes for outgoing calls and incoming calls.
Table 8.
Priority of outgoing call condition codes
Priority
Highest
2nd
3rd
4th
Lowest
For example, an outgoing call is an LRS Outgoing call (L) but it is also a transferred call. The Call
Logging data condition code will be T to indicate that the call was an Outgoing Transfer. (A
transferred call's condition code takes precedence over the type of call - LRS Outgoing call [L].)
Table 9.
Priority of incoming call condition codes
Priority
Highest
2nd
Lowest
For example, an incoming call is a DDI Incoming call (D), but it is also a transferred call. The Call
Logging data condition code will be t to indicate that the call was an Incoming Transfer call. (A
transferred call's condition code takes precedence over the type of call - DDI Incoming call [D].)
62
Condition
Code
T or H
T = Outgoing Transfer Call
H = Outgoing Hold Call
F
F = Call Forward Outside Call
W
W = Closed Numbering
Note: In the case of an MCO outgoing call seizing the
private line, the condition code 0 is displayed.
L
L = LCR Outgoing Call
O
O = Outgoing Call
Condition
Code
h or t
h = Incoming Hold
t = Incoming Transfer
D, N, or S
D = DDI Incoming Call
N = Network Incoming Call
S = DISA Incoming Call
I or A
I = Incoming Call
A = Abandoned Call
S-ICX (International) issued April 2002
Section 700 - Operation
Description
Description
S-ICX-64-700
Advertisement
Table of Contents
