Table of Contents
Advertisement
Section 700 - Operation
Operation
To set Exchange Line Queuing:
1. Lift the handset or press the ON/OFF key.
2. Enter a exchange line access code (default = 9 or 81-84).
3. Enter the Callback Request code (default = 3).
4. Press the ON/OFF key.
5. Wait for the Exchange Line Callback alert tone.
To respond to the Exchange Line Callback alert tone:
1. Lift the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
Response to the Exchange Line Callback must be within 15 seconds or Exchange Line Queuing
will be cancelled.
•
The Exchange Line Queuing feature may also be used if you hear a busy tone when trying to
make a call using the MCO Exchange Line Access feature.
Universal Night Answer to Page
Description
During night mode, Universal Night Answer (UNA) sends incoming calls for selected trunks to ring
external paging speakers. UNA calls can be picked up from any extension, provided the extension's
Class of Service (COS) allows UNA answer. Beginning with Version 4.5 and higher, this feature can
be programmed so that incoming calls ring on both external paging speakers and at extensions with
CO/MCO appearances on FF keys (Key Telephones only).
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Busy tone
displays
Wait CBK-TRK
Result
• Outside dial tone
• CO XXX displays (where XXX = line
number
205
Advertisement
Table of Contents
