Table of Contents
Advertisement
Section 700 - Operation
7. Enter the Call Forward ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or any existing data, press the FL/R key.
8. Press the HOLD key to store the entry.
9. To set additional Call Forward ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Call Forward ID codes are set.
11. Press the MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Call Forward No Answer Destination Extension
Description
You can assign a Call Forward No Answer Destination Extension for each extension. This is typically
used for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
Next extension number displays
Desired extension displays
CF ID-EXT Number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-NoANS Ext displays
83
Advertisement
Table of Contents
