Table of Contents
Advertisement
Chapter 4. User Maintenance
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
10. To set Call Forward No Answer destinations for additional
extensions, press the volume up and down key or press the
HOLD key to move to the desired Extension.
11. Repeat steps 9-11 until all extension are entered.
12. Press the MEMORY key to exit the entry mode.
13. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Caller ID Logging Extensions
Description
You can assign Caller ID Call Logging to extensions. The system is limited to 20 call logging
extensions per cabinet as follows:
Number of Cabinets
1
2
3
4
5
6
84
Action
Total Number of
Call Log Extensions
20
40
60
80
100
120
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Enter CODE displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
S-ICX-64-700
Advertisement
Table of Contents
