Table of Contents
Advertisement
Chapter 6. DSLT Features
2. Enter the Specified Exchange Line Answer code (default =
*0).
3. Enter the exchange line number.
Hardware Requirements
•
N/A
Considerations
•
N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialling the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold "orbit" and that orbit number announced during the page. The paged
party can then pick up the call by dialling the orbit number.
Operation
To place a call on Floating Hold:
1. Press the HOLD key.
To retrieve a call from Floating Hold:
1. Enter the Floating Hold Answer feature access code
(default = *9).
2. Enter the Floating Hold orbit number 01-96 (CPC-HS/HM)
or 01-09 (CPC-HS/HM) (See considerations below.)
Hardware Requirements
•
N/A
228
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Result
Intercom dial tone
Result
S-ICX-64-700
Advertisement
Table of Contents
