Panasonic S-ics Technical Manual page 114

Chapter 4. User Maintenance
To set the Verified Account code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 04.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter the Verified Account table number (001-500).
6. Press the HOLD key.
7. Press the HOLD key.
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes must be unique. If there is a matching entry
entered, the System will not accept the entry and will double
beep.)
Note: To clear an entry or existing data, press the FL/R key.
9. Press the HOLD key.
10. Enter the TRS (Call Barring) Class to be associated with
the Verified Account Code entry.
11. Press the HOLD key to store the entry.
12. To add additional Verified Account numbers, press the
volume up or down key or press the HOLD key to move to
the desired Verified Account table number.
13. Repeat steps 8-12 until all Verified Account numbers are
entered.
14. Press the MEMORY key to exit the entry mode
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
114
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
81-
User MAINT displays
8104-
Verified ACCD displays
Table Number displays
XXX-
Verified ACCD displays (where XXX
= account code table number)
0001 : AAAAAAAAAAA
XXX:Account Code displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
0002 :X
XXX:TRS Class displays (where X =
TRS Class)
0001 :YYY displays (where YYY = the
next account code table number)
Desired Verified Account table number
displays
Table Number
81-
User MAINT displays
OR...
ON/OFF LED goes off
S-ICX-64-700