Panasonic S-ics Technical Manual page 75

Section 700 - Operation
Operation
To assign a Voice Mail Transfer key from a phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the FF key to be assigned as the Voice Mail Transfer
key.
4. Press REDIAL and 74nnnn (VM Transfer Key 1) where
nnnn is the voice mail extension number
or
Press REDIAL and 75nnnn (VM Transfer Key 2) where
nnnn is the voice mail extension number
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
To use a Voice Mail Transfer key:
1. Lift the handset or press the ON/OFF key to answer the
incoming call.
2. Press the VM/TRF (1 or 2) key .
3. Press the DSS/BLF key, dial an extension number or select
the extension from the extension directory on the large dis-
play telephone.
4. Replace the handset or press the RELEASE, ON/OFF, or
PROG key.
Once a call is sent to the voice mail, after the voice mail answers, the system sends the VM Transfer
ID 1 or 2 + the extension number (BLF/DSS, Directory or dialled number).
Hardware Requirements
• N/A
Considerations
• The VM/TRF key can be assigned to any key phone, DSS/72 or EM/24. The VM/TRF key
cannot be assigned to a one-touch key.
• The VM/TRF key can be used to transfer intercom as well as Exchange Line calls to a voice
mailbox.
• The Voice Mail Transfer ID codes are assigned in the Maintenance Programming section. Up to
ten digits can be stored.
• The system responds to key operations during the transfer in the following ways:
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 3. System Features
Result
Intercom dial tone
Result
Connected to caller
System places caller on hold
75