Conference Calls - Panasonic S-ics Technical Manual

Section 700 - Operation
To answer a Camp-on (Call Waiting) signal:
1. Replace the handset.
2. Lift the handset again to be connected to the waiting call.
OR....
Hookflash.
Hardware Requirements
• N/A
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See "To camp a call onto a
busy extension:" on page 266.

Conference Calls

Description
Conference Calls allow you to add another party to an existing conversation. With the standard
system configuration, up to 3 parties can be included in a conference call at any time.
Note: The SLT does not support 8-party conference calling.
The system supports the following types of three-party conference calls:
• 3 extensions
• 2 extensions and 1 trunk line
• 1 extension and 2 trunk lines
Operation
To establish a conference call:
1. While on a call, hookflash to place your current call on hold.
2. If adding an outside party, dial a trunk access code (default
= 9 or 81-84.
3. Dial the number of the party you wish to add to the call.
4. Hookflash when your call is answered.
5. To drop out of the conference call, hang up.
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 7. SLT Features
Result
• Current call placed on hold
• Connected to waiting call
Result
• Outside dial tone
285